Abstract:Multi-directional cyclic loads, as often experienced by piles supporting offshore wind turbines (OWTs), could reduce global soil-pile stiffness, and jeopardize the serviceability of OWTs. Most of the existing p-y models focus on uni-directional soil-pile interaction, with a few multi-directional models developed at the cost of additional parameters that require unusual tests for multi-directional cycling. This study presents a multi-directional bounding-surface based cyclic model for lateral soil-pile interaction in both sand and clay. It can model multi-directional cyclic hysteresis and shakedown using only six parameters, without requiring extra parameters and tests for multi-directional cycling. This is achieved by introducing several uni-directionally loaded springs around the pile at each depth. The cyclic p-y relation for multi-directional loading is derived from that for uni-directional loading, by solving equations on equality of work required for the two models under a given displacement increment. The proposed model is validated against experimental results on piles under uni- and multi-directional cycling with various load- and displacement-controlled paths. It is found that following change of loading direction, the pile displacement accumulation is not only limited to the new loading direction, but includes transverse cycling towards the direction of least soil stiffness softened by the recent loading directions. The transverse cycling causes an additional reduction in the global soil-pile stiffness, facilitating the accumulation of lateral pile displacement.

Numerical study on response of a single pile under unidirectional and multidirectional horizontal loadings

An Improved Model for the Horizontal Dynamic Response of Piles in Saturated Soil

Dynamic response analysis for a single pile subjected to lateral loading

Model Tests on Elevated Piles Subjected to Lateral Static and Impact Loading

Analytical Elastoplastic Solutions of Laterally Loaded Long Piles

Centrifuge Modelling of Lateral Loading Behaviour of a “Semi-Rigid” Mono-pile in Soft Clay

Elastoplastic Analytical Computation of Long Piles under Combined Lateral Loads

Elastoplastic Solutions for Single Piles under Combined Vertical and Lateral Loads

Three-dimensional Finite Element Study of a Single Pile Response to Multidirectional Lateral Loadings Incorporating the Simplified State-Dependent Dilatancy Model

Behavior Analysis of Laterally Loaded Single Pile under Large Deflection

Elastoplastic solutions of deflections and inner forces for slightly inclined single pile subjected to combined vertical and lateral loads

Elastic Solutions for Partially Embedded Single Piles Subjected to Simultaneous Axial and Lateral Loading

Influence Of Excavation Unloading On Vertical Bearing Behavior Of Existing Pile Groups

Three-parameter method for slightly inclined single pile with partial pile head fixity under combined vertical and lateral loads

Analysis Of Deformation And Internal Force For Single Pile Under Combined Vertical And Lateral Loads Considering Yielding Of Soil

Model Test and Numerical Simulation of Single Pile Response under Combined Loading in Slope

Longitudinal Dynamic Response of Pile Foundation in a Nonuniform Initial Strain Field

A Multi-Axial Bounding Surface P-Y Model with Application in Analyzing Pile Responses under Multi-Directional Lateral Cycling

Lateral Response Analysis of a Large‐Diameter Pile Under Combined Horizontal Dynamic and Axial Static Loads in Nonhomogeneous Soil

Ultimate Soil Resistance of the Laterally Loaded Pile in Uniform Sand

Numerical study on the lateral behavior of pile groups in Toyoura sand using the hypoplastic constitutive model