Abstract:Considering the nonlinearity and uncertainty of a high-speed flexible parallel mechanism,a robust model predictive control strategy was presented to suppress the vibration response of the system.Piezoceramic patch actuator and strain gauge sensors were used.The finite element method and modal truncation technique were applied to obtain the dynamic model of the mechanism.The nonlinear,coupling factors and high-order modal effects existing in the dynamic model of the system were considered as disturbances.The modal force was treated as an uncertain disturbance and the measurement noise was considered.The predictive model of the system dynamic response was introduced and the output was forecasted by the model.A Kalman filter estimator was designed to estimate the state variables of the system.A standard quadratic programming optimization problem was formed where the performance index function minimizes a quadratic performance function.The constraints were the control input voltage and its change rate.The optimization problem was solved to obtain the optimal control output voltages and a rolling optimization control system was then constructed to suppress the vibration response of the system.The optimum placements of the actuators and sensors were determined by using the controllability index featured as actuating energy and the observability index featured as signal energy.Taking a novel 2-DoF parallel mechanism as an example,the experimental modal method was applied to obtain the first two natural frequencies and damping ratios.Comparing with the results obtained by the finite element method,it shows that the theoretical model is not accurate enough.Using dSPACE real-time simulation system and MATLAB/Simulink,the control system was built and the vibration control experimental study was carried out.The experimental results show the proposed controller can effectively suppress the vibration response,and the effectiveness and robustness of the controller was verified.

Robust Predictive Palstance Control of Combine Cylinder Threshing

Robust Hierarchical Model Predictive Control for Trajectory Tracking with Obstacle Avoidance

Robust Adaptive Fault-Tolerant Coordinated Control For Biaxial Gantry System With Friction Compensation

Predictive Functional Control for Multivariable First Order plus Dead Time System

Adaptive Robust Motion Control of a Fast Forging Hydraulic Press Considering the Nonlinear Uncertain Accumulator Model.

Adaptive robust synchronous control of a individual metering dual-cylinder pneumatic system with composite parallel method

Adaptive Robust Control Of Variable Displacement Pumps

Nonlinear Cutterhead Pose Control of Large-Diameter Slurry Shields in Complicated Stratum

Adaptive Robust Control of Pneumatic Cylinders Using Fast Switching On/off Solenoid Valves

Support Vector Machine Based Nonlinear Model Multi-Step-ahead Optimizing Predictive Control

A Composite Adaptive Robust Control for Pneumatic Servo Systems with Time-Varying Inertia

A Position Control Based on Active Disturbance Rejection Controller Considering Parameter Variations of Harmonic Drive Gear Systems

Virtual unmodeled dynamic and data-driven nonlinear robust predictive control

Robust Leader–Follower Control for Cooperative Harvesting Operation of a Tractor-Trailer and a Combine Harvester Considering Confined Space

Terminal Constrained Robust Hybrid Iterative Learning Model Predictive Control for Complex Time-Delayed Batch Processes

Robust switched predictive control for multi-phase batch processes with uncertainties and unknown disturbances

Robust asynchronous fuzzy predictive fault-tolerant tracking control for nonlinear multi-phase batch processes with time-varying reference trajectories

Cross-Coupling Predictive Control for Two Axes Synchronous Systems

Robust Model Predictive Control for Uncertain Discrete-Time System with Both States and Input Delays

Robust H∞ stabilization of uncertain T-S fuzzy systems via dynamic integral sliding mode control

Vibration control of a high-speed flexible parallel mechanism based on model predictive control