Abstract:In this study, one of the commonly used MXene (Ti3C2Tx) and β nucleated isotactic polypropylene (β-iPP)/MXene composites of different compositions were fabricated. The effects of MXene on non-isothermal crystallization and polymorphic behavior of β-iPP/MXene composites were comparatively studied. The non-isothermal crystallization kinetics indicates that for all samples, the lower cooling rates promote composites to crystallize at higher temperatures. When MXene and β-Nucleating agent (β-NA) are added separately, the crystallization temperature of composites shifts towards higher temperatures at all cooling rates. When MXene and β-NA are added simultaneously, the composite shows different cooling rate dependence, and the effects of improving crystallization temperatures is more obvious under rapid cooling. The activation energy of four samples iPP, iPP/MXene, iPP/β-NA, and iPP/MXene/β-NA were −167.5, −185.5, −233.8, and −218.1 kJ/mol respectively, which agree with the variation tendency of crystallization temperatures. The polymorphic behavior analysis obtained from Differential Scanning calorimetry (DSC) is affected by two factors: the ability to form β-crystals and the thermal stability of β-crystals. Because β-crystals tend to recrystallize to α-crystals below a critical temperature, to eliminate the effect of β-α recrystallization, the melting curves at end temperatures Tend = 50 °C and Tend = 100 °C are comparatively studied. The results show that more thermally unstable β-crystals would participate in β-α recrystallization with higher cooling rates. Moreover, thermal stability of β-crystals is improved by adding MXene. To further verify these findings, samples of three different thermal conditions were synthesized and analyzed by DSC, X-Ray Diffraction (XRD), and Polarized Light Optical Microscopy (PLOM), and the results were consistent with the above findings. New understandings of synthesizing β-iPP/MXene composites with adjustable morphologies and polymorphic behavior were proposed.

High Efficiency Nucleating Agents of Polyoxymethylene

Research advance in polyoxymethylene nucleating agents

Manipulation of Non-Isothermal Crystallization Kinetics of Poly(lactic Acid) Composite Film by a Novel Nucleating Agent

Investigation on the Effects of MXene and Β-Nucleating Agent on the Crystallization Behavior of Isotactic Polypropylene

Effects of Polyoxymethylene As a Polymeric Nucleating Agent on the Isothermal Crystallization and Visible Transmittance of Poly(lactic Acid)

Exploring the Effects of MXene on Nonisothermal Crystallization and Melting Behavior of Β-Nucleated Isotactic Polypropylene

INFLUENCE OF HEAT TREATMENT ON CRYSTALLIZATION BEHAVIOR OF POM

Modification of Polypropylene with Composite Nucleating Agents Containing 2,2-Methylene-bis-(4, 6-di-t-butylphenylene) Phosphate/Attapulgite/Silica Nano-particles

Effects of nucleating agent content on the microstructure and macroscopic performances of polypropylene analyzed by non‐isothermal crystallization behaviors and isothermal crystallization morphologies

Effect of Oleic Acid-modified Nano-CaCO3 on the Crystallization Behavior and Mechanical Properties of Polypropylene

Crystallization Behavior and Morphology of Novel Aliphatic Poly (Monothiocarbonate)s

Distinct Crystallization Pathways of Polyoxymethylene in Methanol System

Effect of different nucleating agent on crystallization kinetics and morphology of polypropylene

PE/PE‐g‐MAH/Org‐MMT Nanocomposites. II. Nonisothermal Crystallization Kinetics

Effect Of Beta-Nucleating Agents On Crystallization And Melting Behavior Of Isotactic Polypropylene

Influence of compounded α/β-nucleating agents on the crystallization behavior and mechanical properties of isotactic polypropylene

Study On Crystallization Behaviour Of Polypropylene Containing Nano-Calcium Carbonate And Organic Nucleating Agents

Non-isothermal crystallization behavior of polypropylene with nucleating agents and nano-calcium carbonate

Progress in Nucleating Agents for Polyamide

Isothermal crystallization of polypropylene/surface modified silica nanocomposites

Improving Mechanical Performance of Immiscible Polypropylene/poly(methyl Methacrylate) Blends by Adding Calcium Carbonate Nanoparticles with Bifunctions of Compatibilization and Β-Nucleation