SYNTHESIS AND PROPERTIES OF POLY(ARYL ETHER KETONE)S CONTAINING PENDANT ARYL ESTER GROUPS
Song Cheng,Yu Wenwen,Zhong Ming,Zhu Zhifang,Yi Zhiqun,Song Caisheng
DOI: https://doi.org/10.3724/sp.j.1105.2011.09485
2011-01-01
Acta Polymerica Sinica
Abstract:A series of novel poly(aryl ether ketone) s containing pendant aryl ester groups(PEK-COO-Ar) were prepared from poly(aryl ether ketone)s containing pendant carboxyl acid groups(PEK-A) and phenol in the presence of 1,1,2,2-tetrachloroethane and by using p-toluenesulfonic acid as a catalyst.The PEK-A was synthesized from trimellitic anhydride chloride(TMAc),terephthaloyl chloride(TPC) and 1,4-bis(4-phenoxybenzoyl)benzene(p-EKKE) by low temperature solution poly-condensation.By changing the molar ratio of TMAc and TPC a series of PEK-A polymers were prepared.The PEK-COO-Ars were characterized by Fourier transform infrared spectroscopy(FTIR),wide-angle X-ray diffraction(WAXD),thermal gravimetric analysis(TGA) and differential scanning calorimetry(DSC).The results showed that the glass transition temperature(Tg) of the PEK-COO-Ar was in the range of 195 ～ 219℃ and the decomposition temperature(Td) at 5% weight loss was from 416℃ to 447℃ and the melting temperature(Tm) was between 325℃ and 345℃.The Tg of the PEK-COO-Ar increased by increasing the mole ratio of aryl ester groups in the polymer,while the Td deceased.The polymers were readily soluble in N-methly-2-pyrrodine,chloroacetic acid and concentrated sulfuric acid at room temperature.They were swelling or soluble in the strong polar aprotic solvent such as N,N-dimethylformamide(DMF),N,N-dimethylacetamide(DMAc) and dimethyl sulfoxide(DMSO) by heating.The polymers converted to amorphous when the molar ratio of TPC to TMAc was less than 1.The polymers had good mechanical properties after being isothermally crystallization.The tensile strength,elongation at break and elastic modulus of S2’(TPC/TMAc = 60/40) and S3’(TPC/TMAc = 50/50) were 112.1 MPa,27%,2.9 GPa and 130.3 MPa,24.2%,2.4 GPa,respectively.