Abstract:From the stripping points, the high intensity proton beam of a compact cyclotron travels through the fringe field area of the machine to the combination magnet. Starting from there the beams with various energy is transferred to the switching magnet for distribution to the beam line targets. In the design of the extraction and transport system for the compact proton cyclotron facilities, such as the 70MeV in France and the 100MeV in China, the space charge effect as the beam crosses the fringe field has not been previously considered; neither has the impact on transverse beam envelope coupled from the longitudinal direction. Those have been concerned much more with the higher beam-power because of the beam loss problem. In this paper, based on the mapping data of 70MeV cyclotron including the fringe field by BEST Cyclotron Inc (BEST) and combination magnet field by China Institute of Atomic Energy (CIAE), the beam extraction and transport are investigated for the 70MeV cyclotron used on the SPES project at Istituto Nazionale di Fisica Nucleare, Laboratori Nazionali di Legnaro (INFN–LNL). The study includes the space charge effect and longitudinal and transverse coupling mentioned above, as well as the matching of beam optics using the beam line for medical isotope production as an example. In addition, the designs of the ±45° switching magnets and the 60° bending magnet for the extracted beam with the energy from 35MeV to 70MeV have been made. Parts of the construction and field measurements of those magnets have been done as well. The current result shows that, the design considers the complexity of the compact cyclotron extraction area and fits the requirements of the extraction and transport for high intensity proton beam, especially at mA intensity levels.

Transfer beamline design after stripping extraction for CYCIAE-100

High Intensity Proton Beam Transportation Through Fringe Field of 70 MeV Compact Cyclotron to Beam Line Targets

Conceptual design of 5 MW-NBI injector for HL-2 M tokamak

Physics design of phase and energy adjustment for heavy ion beam of the same mass with two-charge state on BISOL

Construction Progress of Two Superconducting Cyclotrons for Proton Therapy and Proton Irradiation at CIAE *

THE CONTROL SYSTEM DEDICATED FOR BEAM LINE OF PROTON RADIOGRAPHY TEST-STAND ON A 100 MeV CYCLOTRON CYCIAE-100 *

Design Study of Multi-Charge Low Energy Beams Transport for BISOL Post Accelerator

CW RFQ design and investigation for multi-charge-state acceleration of radioactive beams from BISOL

Design of a Beam Line for Simultaneous Dual-Beam Ion Implantation

The optimization for the conceptual design of a 300 MeV proton synchrotron

Design, Fabrication, and Beam Commissioning of A Continuous-Wave Four-Rod Rf Quadrupole

Design of Beam Collection System with High Transmission Efficiency and Tunablity

Design of A Compact Ring for Proton Radiation Applications

Beam loading effects and microwave instability in the booster ring of a high intensity heavy-ion accelerator facility

The beam commissioning of a CW high charge state heavy ion RFQ

Beam Simulation Studies of ECR Beam Extraction and Low Energy Beam Transport for FRIB.

Concept Design of the BTF Accelerator

Design of a CW BISOL RFQ for Three Kinds of High-Charge-State Ions Simultaneous Acceleration

CLAPA Proton Beam Line in Peking University

Proposal and design of 81.25 MHz heavy ion drift tube linacs for BISOL

Upgrade of beamline 3W1B at Beijing Synchrotron Radiation Facility