Abstract:To achieve stable cycling of high-energy-density and high-voltage anode-free lithium metal batteries, the interfacial stability of both lithium metal anode and high-voltage cathode is demanded. Electrolytes based on ether solvents tend to have excellent compatibility with the lithium metal anode, but due to their low oxidation potential (generally less than 4.0 V vs. Li+/Li), they render high-voltage LiNi0.8Co0.1Mn0.1O2 (NCM811) cathodes unsatisfactory electrochemical performance. Here, an average Coulombic efficiency of 99.4% is realized for lithium metal plating-striping by using an ether-based local high-concentration electrolyte. By further intro-ducing a minute amount of lithium difluoro(oxalate)borate (LiDFOB) additive (0.02 M) into this baseline elec-trolyte, its oxidation stability is increased to 4.3 V without compromising its high Coulombic efficiency towards reversible lithium plating-striping. Consequently, this additive-supported electrolyte enables the high-loading (3.0 mAh cm-2) Cu||NCM811 anode-free cells to achieve high-capacity retention at both room temperature (-95% capacity retention after 50 cycles) and-20 C (-79% capacity retention after 30 cycles). A combination of microscopic and spectroscopic investigations aided by theoretical calculations demonstrate that the LiDFOB additive helps generate a Li3N-and LiF-rich solid electrolyte interphase on the lithium metal anode side, enabling dense and uniform lithium deposition, meanwhile, it also leads to a uniform and compact cathode electrolyte interphase on the high-voltage NCM811 cathode side, mitigating the transition metals dissolution. This work provides a simple and promising strategy for the electrolyte design of high-voltage anode-free batteries.

High-Rate Capability and Enhanced Cyclability of Rechargeable Lithium Batteries Using Foam Lithium Anode

Lithium Foam for Deep Cycling Lithium Metal Batteries

High Power Density & Energy Density Li-ion Battery with Aluminum Foam Enhanced Electrode: Fabrication and Simulation

Surface Engineering of Commercial Ni Foams for Stable Li Metal Anodes

Restructured Rimous Copper Foam As Robust Lithium Host

Electrochemically Preplated Lithium on Silver Nanoparticle‐Decorated Three‐Dimensional Vertically Aligned Graphene Foam for Rechargeable Lithium Batteries

Au@rGO modified Ni foam as a stable host for lithium metal anode

A Stable Porous Aluminum Electrode with High Capacity for Rechargeable Lithium-Ion Batteries

Silicon Foam Anode with Stabilized Interface for Lithium-ion Batteries

Interfacial high-concentration electrolyte for stable lithium metal anode: Theory, design, and demonstration

Improving electrochemical performance of NiO films by electrodeposition on foam nickel substrates

A Compatible Carbonate Electrolyte with Lithium Anode for High Performance Lithium Sulfur Battery

Highly Lithiophilic Oxidative Interfacial Layer for 3D Foam-Based Lithium Metal Anode: Lithium Impregnated Metal Foam Anode (LIMFA)

High Rate and Cycling Stable Li Metal Anodes Enabled with Aluminum-Zinc Oxides Modified Copper Foam

A Highly Reversible, Dendrite‐Free Lithium Metal Anode Enabled by a Lithium‐Fluoride‐Enriched Interphase

An Additive-Enabled Ether-Based Electrolyte to Realize Stable Cycling of High-Voltage Anode-Free Lithium Metal Batteries

Surface Modification of Ni Foam for Stable and Dendrite-Free Lithium Deposition

Double-layered Skeleton of Li Alloy Anchored on 3D Metal Foam Enabling Ultralong Lifespan of Li Anode under High Rate

Full-Cell Cycling of a Self-Supporting Aluminum Foil Anode with a Phosphate Conversion Coating

Promising graphene/carbon nanotube foam@ π -conjugated polymer self-supporting composite cathodes for high-performance rechargeable lithium batteries