Abstract:Cavity ring-down spectroscopy (CRDS) is a highly sensitive molecular absorption spectroscopic technology, which has been widely used in mirror reflectance measurement, atmospheric trace gas detection, molecular precision spectroscopy and other fields. It deduces the intracavity absorption by measuring the rapid variation of the ringdown signal. As a result, detector with high linearity, broad bandwidth and low electrical noise is indispensable. Additionally, owing to the large noise in laser frequency, low laser-to-cavity coupling efficiency is obtained. Consequently, the cavity transmission is faint, which deteriorates the detection sensitivity. Optical feedback can address this problem by locking the laser to the cavity longitudinal mode. Then, the laser frequency noise is suppressed and hence better detection sensitivity is expected. Optical feedback CRDS with V-shape cavity has been widely studied. Compared with Fabry-Perot cavity, this cavity geometry is very sensitive to mechanical vibration and possesses low degree of fineness due to an additional mirror. In this paper, optical feedback linear cavity ring-down spectroscopy based on a Fabry-Perot cavity with a degree of fineness of 7800 is presented. The principle of the combination of optical feedback and linear cavity is explained from the perspective of the light phase, which shows that the reflection will not generate efficient optical feedback if the feedback phase is appropriately controlled and laser to cavity locking can be therefore realized. And then, the factors influencing the stability of ring-down signal are analyzed, including the feedback ratio, the trigger voltage for the ringdown event, and the distance between the light spot and the detector center. The experimental results show that a superior fractional uncertainty of the empty ringdown time of 0.026% can be obtained with a low feedback rate (3% FSR), a high ringdown signal trigger threshold (90% cavity mode amplitude) and superposition of the light spot with the detector center. With Allan variance analysis, the white noise response of 1.6 × 10 –9 cm –1 ·Hz –1/2 and the detection sensitivity of 1.3 × 10 –10 cm –1 for trace gas detection can be achieved in an integration time of 180 s, corresponding to the lowest CH 4 concentration detection of 0.35 × 10 –9 at 6046.9 cm –1 . This robust spectroscopic technique paves the way for constructing high-sensitive and stable-cavity based instrument for trace gas detection.

Continuous-Wave Cavity Ring-Down Technique for Accurate Measurement of High Reflectivity

Optical Feedback Cavity Ring-Down Technique for Accurate Measurement of Ultra-High Reflectivity

Accurate high reflectivity measurement based on a novel optical feedback cavity ring-down technique

High Reflectivity Measurement with Cavity Ring-Down Technique

Effect of instrumental response time in exponential-decay based cavity ring-down techniques for high reflectivity measurement - art. no. 67201E

Precise Reflectance/Transmittance Measurements of Highly Reflective Optics with Saturated Cavity Ring-Down Signals

Simultaneous determination of optical loss, residual reflectance and transmittance of highly anti-reflective coatings with cavity ring down technique.

Simultaneous mapping of reflectance, transmittance and optical loss of highly reflective and anti-reflective coatings with two-channel cavity ring-down technique

Error Analysis of the Loss Measurement of Super High Reflectivity Components Using Continuous CRD Technique

Continuous wave cavity ringdown spectroscopy incorporating with an off-axis arrangement, white noise perturbation, and optical re-injection

Simultaneous Measurement of S- and P-Polarization Reflectivity Using Optical Feedback Cavity Ring Down Technique

Uncertainty of optical feedback linear cavity ringdown spectroscopy

Ultrasensitive Near-Infrared Cavity Ring-Down Spectrometer for Precise Line Profile Measurement

System design and signal analysis of cavity ring-down absorption spectroscopy

Laser-locked, Continuously Tunable High Resolution Cavity Ring-Down Spectrometer.

A rigid, monolithic but still scannable cavity ring-down spectroscopy cell

Quantitative Moisture Measurement with a Cavity Ring-down Spectrometer Using Telecom Diode Lasers

Wavelength-scanned Cavity Ring Down Spectroscopy Based on Fourier Transform

Study of Cavity Enhanced Absorption Spectroscopy Based on a Swept Diode Laser

Surface Plasmon Resonance Demodulation by Optical Ring-Down Cavity Technology

Measurement of the Reflection and Loss of the Hybrid Air-Core Photonic-Bandgap Fiber Ring Resonator