Abstract:[Objective]The ultimate undrained bearing capacity of the strip footing on slopes is studied using numerical simulation and theoretical analysis. [Method]First, the numerical model of the strip footing on a slope is built to consid-er the change in the undrained bearing capacity coefficient. Then, after verifying the reliability of the numerical computa-tion, the influences of several parameters on the bearing capacity, such as the normalized soil strength, slope angle, and relative distance of the footing to the slope crest are studied. [Result]It is found that the collapse mode of the footing is related to the normalized soil strength, and the slope is not suitable for structure construction when the normalized soil strength is below the critical value. The results also indicate that all the factors pertaining to the soil and slope have a sig-nificant influence on the bearing capacity of the footing on the slope. Therefore, it is difficult to obtain a computation for-mula only using the numerical analysis results. To obtain a theoretical solution for the bearing capacity of the footing on a slope, the upper bound theory of limit analysis is employed to derive a specific formula for the capacity coefficient, and simplified for easy practical use. The results for the bearing capacity coefficient obtained by numerical simulation with different combinations of parameters are compared with the calculation results of the derived formula to conform the accu-racy of the theoretical derivation. [Conclusion]The comparison shows the high accuracy of the theoretical formula; thus it can be applied in the computation of the bearing capacity of strip footings on slopes.

CALCULATION OF THE ULTIMATE BEARING CAPACITY OF SOIL SLOPE BASED ON THE UNIFIED STRENGTH THEORY

THE CRITICAL EDGE LOAD OF COMPOSITE GROUND REINFORCED BY STONE COLUMNS UNDER RIGID FOUNDATION

Formula of ultimate bearing capacity of shallow foundation based on unified strength theory

DETERMINATION OF ULTIMATE BEARING CAPACITY OF ROCK FOUNDATION BASED ON UNIFIED STRENGTH THEORY

Study on the Crack Mechanism and Back Analysis of Mechanics Parameters of the Soil Slope in the New Area of MaGang

Study on the undrained bearing capacity of strip footing on slope

DOUBLE-SHEAR UNIFIED SOLUTION OF TERZAGHI ULTIMATE BEARING CAPACITY OF FOUNDATION

A Calculation Method for the Bearing Capacity of Saturated Soil under Undrained Conditions

The Effect of the Intermediate Principal Stress on the Ultimate Bearing Capacity of a Foundation on Rock Masses

Calculation of ultimate bearing capacity factor N gamma for rough strip footings

Calculation Method of Uplift Capacity of Pile-Anchor Composite Foundation and Influence of Parameters

Calculation Method for Ultimate Bearing Capacity of Meadow Soil Foundation

Solution of the Ultimate Bearing Capacity at the Tip of a Pile in Inclined Rocks Based on the Hoek-Brown Criterion

STUDY ON ULTIMATE BEARING CAPACITY OF SOFT SANDY GRAVEL ROCK FOUNDATION

The calculation method of limit load upper bound for soil slope

Analysis of Ultimate Bearing Capacity of Culvert Foundation with Crust Layer

Slope Stability Analysis Using Unified Strength Theory

Calculation method for ultimate bearing capacity of reinforced concrete beams based on unified strength theory

Evaluation of equations for the determination of the ultimate bearing capacity of shallow foundation in cohesionless soils

DETERMINATION OF DYNAMIC STRENGTH PARAMETERS OF GEOMATERIALS BASED ON UNIFIED STRENGTH THEORY

Modified minimum principal stress estimation formula based on Hoek-Brown criterion and equivalent Mohr-Coulomb strength parameters