Abstract:Considerable volumes of polluted soil are being discharged around the world resulting in serious pollution. As both Si and Al are important components in the framework of a lightweight aggregate (LWA), polluted soil can be used as a raw material for preparing the LWA. In this study, LWAs were prepared from polluted soil containing Cu, Cr, Ni, and Pb. Tests were conducted to assess their macroscopic, microscopic, and heavy-metal leaching properties. The mechanism underlying heavy metal dissolution and a method to accelerate this dissolution were systematically studied under the condition of monolithic leaching of the LWAs. The solidification state and leaching process of heavy metals under different conditions of the LWA were investigated. The experimental results indicated that the LWA prepared from polluted soil met the LWA standard and new crystalline phases were formed during the sintering process. At the same time, long-term leaching tests and accelerated leaching tests showed that the leaching concentrations of the four heavy metals were all lower than the safety limits specified in Chinese standards. The experiments revealed that the pH, temperature, and ultrasonication could accelerate the dissolution of heavy metals. In particular, ultrasonication caused the heavy metals to exhibit the effects of long-term leaching in a short time. Nevertheless, leaching amount did not exceed the limits specified by the standard, thus improving the our understanding of heavy metal solidification in LWAs. These results could significantly guide the construction industry in establishing an evaluation method for heavy metal dissolution that conforms to the service environment of LWAs, enabling the safe management of solid wastes and the sustainable development of light aggregates.

Progress on the testing method of heavy metals leaching toxicity of solid waste

A Lab Experiment on Eluviating the Mixture of Disassembled Waste Electrical Equipment and Municipal Refuses with Simulated Acid Rain.

[Different Leaching Procedures for Heavy Metal Toxicity of Waste PCBs].

Progresses on Risk Assessment Methods of Bioavailability of Heavy Metal in Soils

Study on heavy metal leaching behavior of waste concrete

The leaching rule of waste catalyst using static leaching test

Assessment of toxicity of heavy metal contaminated soils by the toxicity characteristic leaching procedure

Field Test on Electro-Osmosis in a Heavy Metal Contaminated Soil: Electrokinetic Remediation and Reinforcement of the Soil

Toxic leaching of heavy metals in copper catalyst residue

Recent advances in municipal landfill leachate: A review focusing on its characteristics, treatment, and toxicity assessment

Research Progress of Heavy Metal Pollution in Municipal Solid Waste

Study on heavy metals leaching toxicity and the road application of municipal sewage sludge solidification body

Evaluation Of The Treatment Process Of Landfill Leachate Using The Toxicity Assessment Method

Assessment of toxicity of heavy metal contaminated soils by toxicity characteristic leaching procedure]

Advances in Research on Treatment of Heavy Metal Ions Wastewater by Agricultural Waste

The leaching rules of waste catalyst using dynamic simulation experiment

Study on the dynamic leaching test system against static leaching test

Experimental Study on the Simulation Method of Leaching Rules for Hazardous Components in Landfill

Analysis of the Test Methods of Heavy Metal in Eco-Cement

The importance of time and other determinants in the assessment of heavy metals release during solid waste management

Preparation of lightweight aggregates using waste soil contaminated with heavy metals: Physical properties, microstructure and verification of heavy metal solidification through different leaching tests