Abstract:Purpose In this paper, with the goal of reducing the fuel consumption of UAV, the engine performance optimization is studied and on the basis of aircraft/engine integrated control, the minimum fuel consumption optimization method of engine given thrust is proposed. In the case of keeping the given thrust of the engine unchanged, the main fuel flow of the engine without being connected to the afterburner is optimally controlled so as to minimize the fuel consumption. Design/methodology/approach In this study, the reference model real-time optimization control method is adopted. The engine reference model uses a nonlinear real-time mathematical model of a certain engine component method. The quasi-Newton method is adopted in the optimization algorithm. According to the optimization variable nozzle area, the turbine drop-pressure ratio corresponding to the optimized nozzle area is calculated, which is superimposed with the difference of the drop-pressure ratio of the conventional control plan and output to the conventional nozzle controller of the engine. The nozzle area is controlled by the conventional nozzle controller. Findings The engine real-time minimum fuel consumption optimization control method studied in this study can significantly reduce the engine fuel consumption rate under a given thrust. At the work point, this is a low-altitude large Mach work point, which is relatively close to the edge of the flight envelope. Before turning on the optimization controller, the fuel consumption is 0.8124 kg/s. After turning on the optimization controller, you can see that the fuel supply has decreased by about 4%. At this time, the speed of the high-pressure rotor is about 94% and the temperature after the turbine can remain stable all the time. Practical implications The optimal control method of minimum fuel consumption for the given thrust of UAV is proposed in this paper and the optimal control is carried out for the nozzle area of the engine. At the same time, a method is proposed to indirectly control the nozzle area by changing the turbine pressure ratio. The relevant UAV and its power plant designers and developers may consider the results of this study to reach a feasible solution to reduce the fuel consumption of UAV. Originality/value Fuel consumption optimization can save fuel consumption during aircraft cruising, increase the economy of commercial aircraft and improve the combat radius of military aircraft. With the increasingly wide application of UAVs in military and civilian fields, the demand for energy-saving and emission reduction will promote the UAV industry to improve the awareness of environmental protection and reduce the cost of UAV use and operation.

Descending Phase Parameter Optimization Analysis Based on Fuel Consumption Model

Fuel Economy-Oriented Parameter Tuning for Platoon Distributed Model Predictive Control Based on Bayesian Optimization

Predicting Fuel Consumption Reduction Potentials Based on 4D Trajectory Optimization with Heterogeneous Constraints

Studies on the flight performance optimization of commercial aircrafts

Multiobjective Energy Consumption Optimization of a Flying–Walking Power Transmission Line Inspection Robot During Flight Missions Using Improved NSGA-II

Fuel consumption estimation for jet aircraft: a mathematical model development

A two-phase total optimization on aircraft stand assignment and tow-tractor routing considering energy-saving and attributes

Based on minimum fuel consumption mode integrated optimal control of fixed-wing UAV flight propulsion system

A Flight Ground-Waiting Time Threshold Optimization Model

Research and Optimization of the Descent Phase of Civil Aviation Aircraft in the Vertical Navigation Problem

Flight Path Optimization with Optimal Control Method

Multi-objective Optimization for Cruising Phase in Civil Aircraft’s Trajectory Planning

Multi-objective Optimization of the Aircraft Environment Control System Based on Component-Level Parameter Decomposition

Minimum Fuel Guidance Law for the Powered Descending Phase of A Lunar Module

Research on optimization of approach procedures for airports in an alpine environment

A Comprehensive Framework for Estimating Aircraft Fuel Consumption Based on Flight Trajectories

Aircraft Taxi Path Optimization Considering Environmental Impacts Based on a Bilevel Spatial–Temporal Optimization Model

Optimization of Fuel Injection Control System of Two-Stroke Aeroengine of UAV

4D Trajectory Planning of Aircraft Taxiing considering Time and Fuel

Analytical Results to Fuel-optimal Spacecraft Formation Maneuver

Thermal management of fuel heat sink in aircraft via flow path optimization