Abstract:In the field of computerized numerical control (CNC) machining, high-speed and high-precision machining has been regarded as the key research by many scholars. In conventional methods, high-speed machining and high-precision machining are contradictory. It is inevitable to reduce the feedrate to improve the processing accuracy. In the paper, a pre-compensation based on discrete inverse transfer function (PDIT) theory is proposed. PDIT is able to improve machining contour accuracy without decreasing feedrate. The proposed PDIT theory is divided into three parts: NURBS interpolator, feedrate scheduling, and interpolator with pre-compensation. The NURBS interpolator has great advantage of directly interpolating the parametric curve. Therefore, the paper adopts the NURBS interpolator to accomplish interpolation. In the feedrate scheduling, S-type flexible acceleration and deceleration are used for path planning, and the maximum starting feedrate is obtained under the feedrate constraint. In the interpolator with pre-compensation, the NURBS interpolator is pre-compensated by PDIT. For the input, the response of the transfer function reaches a steady-state response within periods of time. Before steady-state response, the unsteady-state response exists in the transfer function. The unsteady-state response usually sustains dozens of interpolation periods, which inevitably lead to contour error in machining. Hence, the PDIT theory is employed to compensate the contour error caused by the unsteady-state response of transfer function to NURBS interpolator. The drive system is a transfer function, so the unsteady-state response of drive system can also cause machining errors before the steady-state response. In the paper, the NURBS interpolator is pre-compensated by PDIT theory before drive system to reduce contour errors and improve machining accuracy. Finally, the performance of the proposed PDIT is evaluated by simulations and experiments. The experimental results illustrate that PDIT theory obviously improve the machining accuracy.

Parametric Curve Interpolation Algorithm Based on Predictor-Corrector Formula

LOOK-AHEAD ALGORITHM FOR VELOCITY CONTROL BASED ON PARAMETERIZED CURVE INTERPOLATOR

A Look-Ahead and Adaptive Speed Control Algorithm for Parametric Interpolation

A Real-Time Dual NURBS Interpolator with Optimised Control of Flexible Acceleration and Deceleration for Five-Axis CNC Machining

A Fine-Interpolation-based Parametric Interpolation Method with a Novel Real-Time Look-Ahead Algorithm

Adaptive Prospective Interpolation Method for High Speed Machining of Micro Line Blocks Based on the Cubic Polynomial Model

A Real-Time Feedrate Planning Method And Efficient Interpolator With Minimal Feedrate Fluctuation For Parametric Toolpath

Feeding speed determination method of NURBS curve direct interpolation based on FUZZY inference operation

Bilateral Optimization Feedrate on Splitting NURBS Curve with its Curvature Monotonicity

NURBS curve interpolation algorithm with high accuracy and minimal feedrate fluctuation

A Feedrate Planning Method for the NURBS Curve in CNC Machining Based on the Critical Constraint Curve

A practice on parametric curve interpolator based on NURBS

High speed feed control algorithm with piecewise linear continuous jounce

Study on Algorithm to Generating Quintic Spline Curve

Development of an Adaptive-Feedrate Planning and Iterative Interpolator for Parametric Toolpath with Normal Jerk Constraint

A segment feedrate profile fitting method for parametric interpolation

An interpolation method based on adaptive smooth feedrate scheduling and parameter increment compensation for NURBS curve

An Interpolator for a Non-Uniform Rational B-Spline Curve with a High Efficiency and Accuracy Using Polynomial Representations

NURBS Interpolator with Minimum Feedrate Fluctuation Based on Two-Level Parameter Compensation

NURBS interpolator with pre-compensation based on discrete inverse transfer function for CNC high-precision machining

Adjustment of Feedrate Planning Basing on Discrete Interpolation Interval in Interpolation Process.