Abstract:The selective removal of strontium ion (Sr2+) from seawater has aroused great attention since the occurrence of the Fukushima nuclear accident. Inorganic ion adsorbents show promise in the treatment of large amounts of polluted water. Among of them, the titanates present a stability and selectivity towards strontium, but limited by poor mechanical and granulometric properties. In this work, a novel silica-based titanate (Na2TinO2n+1/SiO2) was synthesized by sol-gel method and then characterized by X-ray diffraction (XRD), thermal analysis (TG-DSC), XPS and BET. Characterization suggested that the crystal of the titanate was greatly affected by temperature, leading to the difference of the adsorption properties. The silica-based material showed a significant increase in specific surface area; and the adsorption process was found to be an ion-exchange reaction occurred inside these particles. Finally, the material calcined at 500 °C was selected to conduct the following batch experiments. Results suggested that the adsorption data of Sr2+ fitted the Langmuir adsorption model well; the pH from 3 to 10 contributed to a better Sr2+ adsorption behavior, with adsorption amount approaching 33.31 mg/g; the adsorption could reach equilibrium within 5 min with data fitted by the pseudo second kinetic model. And the selectivity coefficient revealed that this material had higher selectivity towards Sr2+ contrast to other alkali and alkaline-earth metals. Based on above static experimental results, the dynamic treatment was designed and carried out in a glass column. This test demonstrated that Na2TinO2n+1/SiO2 could remove the strontium from the simulated seawater effectively and efficiently with no leakage. Generally, this work provides an excellent material to removing Sr2+ from high salinity solution with good column compatibility.

Ion Exchanging and Leaching Properties of Strontium by Potassium Tetratitanate Whisker

Separation of strontium ions from a simulated highly active liquid waste using a composite of silica-crown ether in a polymer.

SPEC Process II. Adsorption of Strontium and Some Typical Co-Existent Elements Contained in High Level Liquid Waste Onto a Macroporous Silica-Based Crown Ether Impregnated Functional Composite

Chromatographic Separation of Strontium (II) from a Nitric Acid Solution Containing Some Typically Simulated Elements by a Novel Silica‐Based TODGA Impregnated Polymeric Composite in the MAREC Process

SPEC: A New Process for Strontium and Cesium Partitioning Utilizing Two Macroporous Silica-Based Supramolecular Recognition Agents Impregnated Polymeric Composites

Preparation of A Novel Silica-Based Dtbuch18c6 Impregnated Polymeric Composite Modified by Tri-N-Butyl Phosphate and Its Application in Chromatographic Partitioning of Strontium from High Level Liquid Waste

Preparation of Macroporous Silica-Based Crown Ether Materials for Strontium Separation

SPEC Process III. Synthesis of a Macroporous Silica-based Crown Ether-impregnated Polymeric Composite Modified with 1-Octanol and its Adsorption Capacity for Sr(II) Ions and Some Typical Co-existent Metal Ions

Studies on the Separation and In-Situ Sintering Solidification of Strontium by a Highly-Efficient Titanate-Based Adsorbent

Adsorption Behavior of Sr(II) and Some Typical Co‐existent Metals Contained in High Level Liquid Waste Onto a Modified Macroporous Silica‐Based Polymeric DtBuCH18C6 Composite

Solidification of Sr-containing stripping solutions in titanate ceramics

Efficient Separation of Strontium in Different Environments with Novel Acid-Resistant Silica-Based Ion Exchanger

Pellet Silica-Based Titanate Adsorbents with High Selectivity for Strontium Removal from Synthetic Radioactive Solutions

Selective removal of Sr<SUP>2+</SUP> by cation exchange using silica-based titanate adsorbents

First Potassium Fluoroaluminate Ionic Exchanger for Rapid and Selective Removal of Sr2+ with High Capacity

Immobilization of strontium and cesium by aluminosilicate ceramics derived from metakaolin geopolymer-zeolite A composites via 1100 °C heating treatment

Preparation and Density Functional Theory Studies of Aluminosilicate-Based Ceramic Solidified Products for Sr Immobilization

Adsorption Behaviors of Strontium Using Macroporous Silica Based Hexagonal Tungsten Oxide

Preparation of Silica-Based Titanate Adsorbents and Application for Strontium Removal from Radioactive Contaminated Wastewater

Influence of Freeze-Thaw Cycles and High Temperature Exposure on Immobilization Performance of Geopolymer-Zeolite A Composites for Strontium Radionuclide