Abstract:The methanol-to-olefin (MTO) process is important because it offers an alternative to the conventional oil route for the conversion of natural gas or coal to light olefins. The most promising catalysts for the MTO reaction are solid acids with a zeolite structure, where reactants and products such as ethylene and propylene may freely diffuse through active catalysts, but products with larger kinetic diameters are trapped within the cages. In this work, SAPO-34 molecular sieves were synthesized by hydrothermal crystallization, using triethylamine (TEA) as the template. These samples were characterized by X-ray diffraction, scanning electron microscopy, thermo-gravimetric analysis-differential scanning calorimetry, energy dispersive spectroscopy, Fourier transform-infrared (FT-IR) and N(2) adsorption-desorption. The effects of template concentration and crystallization time on the physicochemical properties and catalytic performance were investigated. The crystallinity and morphology of SAPO-34 were influenced by the concentration of the template. Pure SAPO-34 was obtained when the TEA/Al(2)O(3) molar ratio was higher than 2.0. With increased crystallization time, the Si content in SAPO-34 crystals increased, which influenced the surface acidity. FT-IR spectra indicated that all samples were dominated by Lewis acid sites and the sample crystallized for 11 h exhibited the lowest number of Lewis acid sites. The catalytic performance of SAPO-34 was tested with the MTO reaction. High selectivity to olefins (C(2)H(4) + C(3)H(6)) was obtained over the catalyst synthesized with a TEA/Al(2)O(3) ratio of 3.0 and crystallization time of 11 h. At the reaction temperature of 450 degrees C, the methanol conversion approached 100% and the yield of C(2)-C(4) olefins was more than 80%. Hence, SAPO-34 molecular sieves were shown to be excellent catalysts for the MTO reaction. (C) 2010 Curtin University of Technology and John Wiley & Sons, Ltd.

Synthesis of SAPO-41 and SAPO-44 and their performance as acidic catalysts in the conversion of methanol to hydrocarbons

Synthesis of SAPO-44 molecular sieve and its catalytic performance in methanol-to-olefins reaction

Synthesis of SAPO-34 catalysts via sonochemically prepared method and its catalytic performance in methanol conversion to light olefins

Bifunctional Catalysts Composed of Low Silicon‐content SAPO‐34 Nanosheets and in 2 O 3 /zro 2 with Improved Performance for CO 2 Hydrogenation

Synthesis of SAPO-34 nanocrystallites by epoxy-functional organosilane with improved MTO catalytic performance

SAPO-18 Catalysts and Their Broensted Acid Sites

Methanol Conversion on SAPO-34 Catalysts Synthesized by Tri-templates

Silicoaluminophosphate number eighteen (SAPO-18): a new microporous solid acid catalyst

Synthesis, characterization and catalytic performance of SAPO-34 molecular sieves for methanol-to-olefin (MTO) reaction

Synthesis of SAPO-34 Molecular Sieves and Their Catalytic Performances in Methanol-to-Olefins Reaction

Interface Mediated Crystallization of Plate-Like SAPO-41 Crystals to Promote Catalytic Hydroisomerization

Hierarchically structured SAPO-5 molecular sieve catalysts with tailored mesoporosity for alkylation reaction

Synthesis of Nano-sheet SAPO-34 Zeolites Via Aminothermal Method and Its Methanol to Olefins (MTO) Performance

A highly efficient SAPO-34 catalyst for improving light olefins in methanol conversion: Insight into the role of hierarchical porosities and tailoring acid properties based on in situ NH3-poisoning

Synthesis of SAPO-34 with the Presence of Additives and Their Catalytic Performance in the Transformation of Chloromethane to Olefins

The Synthesis of Hierarchical SAPO-34 and Its Enhanced Catalytic Performance in Chloromethane Conversion to Light Olefins

The Synthesis of SAPO-34 with Mixed Template and Its Catalytic Performance for Methanol to Olefins Reaction

Synthesis of SAPO-34 catalyst with different silicon contents and their catalytic performance in chloromethane to olefins

Hierarchical Sapo-34/18 Zeolite with Low Acid Site Density for Converting Methanol to Olefins

Dry-gel conversion synthesis of SAPO-14 zeolites for selective conversion of methanol to propylene

A layered mesoporous SAPO-34 prepared by using as-synthesized SBA-15 as silica source