Abstract:Among various energy storage/conversion systems, lithium-sulfur batteries are considered as one of the most promising candidate due to not only very high theoretical energy density of 2600 Wh kg-1 (based on lithium-sulfur redox couple) and wide operating temperature range benefiting from its unique multiple-electron-transfer chemistry, but also abundant reserves and environmental friendliness of sulfur. However, several intrinsic obstacles should be overcome for its applicably extension, including the ultra-low electrical conductivity of sulfur and its lithiated products, huge volumetric changes during charge and discharge, and the shuttling mechanism of soluble intermediate polysulfides. Here, a hierarchical nanostructured carbon/sulfur hybrid in which the porous carbon was in situ integrated into graphene/single-walled carbon nanotube (SWCNT) hybrid matrix with small cyclo-S8 molecule clusters was fabricated as advanced cathode material for lithium-sulfur battery application. The sp2 graphene/SWCNT hybrid interlinked framework was served as robust conductive scaffold with good electrical conductivity and structure stability, while the micro-/mesoporous carbon accommodated sulfur and lithium polysulfides, provided accessibility for liquid electrolyte to active material, and suppress the shuttle behavior due to the spacial confinement. Therefore, such hierarchical all-carbon nanostructure hybridized with small cyclo-S8 molecule clusters obtained an excellent electrochemical performance including an ultrahigh specific capacity of 1121 mAh g-1 at 0.5 C, a favorable high-rate capability of 809 mAh g-1 at 10 C, a very low capacity decay of 0.12 % per cycle, and an impressive cycling stability of 877 mAh g-1 after 150 cycles at 1 C. As sulfur loading increasing from 50 wt % to 77 wt %, high capacities of 970, 914, and 613 mAh g-1 were still available at current densities of 0.5, 1, and 5 C respectively. Based on the total mass of packaged devices, gravimetric energy density of GSH@APC-S//Li cell was expected to be 400 Wh kg-1 at a power density of 10000 W kg-1, matching the level of engine driven systems. Reference: [1] HJ Peng, et al. Adv. Funct. Mater., 2014, DOI: 10.1002/adfm.201303296

Ordered mesoporous carbon/sulfur nanocomposite of high performances as cathode for lithium–sulfur battery

Hierarchically Structured Sulfur/Carbon Nanocomposite Material for High-Energy Lithium Battery

Facile and Scalable Synthesis of Micro-Mesoporous Carbon/magnesium Oxide/sulfur Composite for Lithium-Sulfur Batteries

Fabrication of oriented-macroporous-carbon incorporated with γ-Al 2 O 3 for high performance lithium-sulfur battery

Large-scale synthesis of ordered mesoporous carbon fiber and its application as cathode material for lithium–sulfur batteries

Nanosized CeO2C2 with Rich Oxygen Vacancies Embedded in Hollow Mesoporous Carbon As a Multifunctional Sulfur-Loaded Matrix for Lithium-Sulfur Batteries

High-content of Sulfur Uniformly Embedded in Mesoporous Carbon: a New Electrodeposition Synthesis and an Outstanding Lithium–sulfur Battery Cathode

A MnO2/Graphene Oxide/Multi-Walled Carbon Nanotubes-Sulfur Composite with Dual-Efficient Polysulfide Adsorption for Improving Lithium-Sulfur Batteries

Engineering the Conductive Network of Metal Oxide‐Based Sulfur Cathode toward Efficient and Longevous Lithium–Sulfur Batteries

Oxygen‐vacancy‐containing cerium oxide nanoparticle‐decorated nanonetwork‐structured carbon toward high‐performance lithium–sulfur batteries

Hierarchical Nanostructured Carbon/Sulfur Hybrid Cathode for High-Performance Lithium-Sulfur Battery

A hierarchical micro/mesoporous carbon fiber/sulfur composite for high-performance lithium-sulfur batteries

Ordered micro-mesoporous carbon nanopheres embedded with Ni/Ni 3 ZnC 0.7 heterostructure as an efficient cathode host for high-performance lithium-sulfur batteries

Synthesis of CoO Nanocrystals Decorated Porous Carbon Nanotube Microspheres As Sulfur Host for High Performance Li/S Batteries.

Sub-nanometric Manganous Oxide Clusters in Nitrogen Doped Mesoporous Carbon Nanosheets for High-Performance Lithium–Sulfur Batteries

Cerium Oxide Nanocrystal Embedded Bimodal Micro-Mesoporous Nitrogen-Rich Carbon Nanospheres as Effective Sulfur Host for Lithium-Sulfur Batteries.

Synthesis of LiTiO<sub>2</sub> Nanocrystals/Ordered Mesoporous Carbon Composite Hosts for High-Performance Lithium-Sulfur Batteries

Synergistic Regulation of Polysulfides Conversion and Deposition by MOF‐Derived Hierarchically Ordered Carbonaceous Composite for High‐Energy Lithium–Sulfur Batteries

Synthesis and Electrochemical Performance of Mn2 O3/Fe2 O3/few Layers Graphene/ Sulfur Cathode for Lithium-Sulfur Batteries

Preparation of CoO/SnO2@NC/S composite as high-stability cathode material for lithium-sulfur batteries

Hollow nitrogen-doped carbon/sulfur@MnO2 nanocomposite with structural and chemical dual-encapsulation for lithium-sulfur battery