Abstract:Different symmetry phases are identified in PbZr0.6Ti0.4O3 ferroelectric thin films as function of the strain introduced by CaF2, SrTiO3 and PMN‐PT substrates. Measured strain‐temperature paths are successfully described by a multi‐domain LGD‐model that predicts the symmetry phases and phase transitions, and the observed enhanced piezoelectricity in one of the phases. Lead based bulk piezoelectric materials, e.g., PbZrxTi1‐xO3 (PZT), are widely used in electromechanical applications, sensors, and transducers, for which optimally performing thin films are needed. The results of a multi‐domain Landau–Ginzberg‐Devonshire model applicable to clamped ferroelectric thin films are used to predict the lattice symmetry and properties of clamped PZT thin films on different substrates. Guided by the thermal strain phase diagrams that are produced by this model, experimentally structural transitions are observed. These can be related to changes of the piezoelectric properties in PZT(x = 0.6) thin films that are grown on CaF2, SrTiO3 (STO) and 70% PbMg1/3Nb2/3O3‐30% PbTiO3 (PMN‐PT) substrates by pulsed laser deposition. Through temperature en field dependent in situ X‐ray reciprocal space mapping (RSMs) and piezoelectric force microscopy (PFM), the low symmetry monoclinic phase and polarization rotation are observed in the film on STO and can be linked to the measured enhanced properties. The study identifies a monoclinic ‐rhombohedral MC‐MA‐R crystal symmetry path as the polarization rotation mechanism. The films on CaF2 and PMN‐PT remain in the same symmetry phase up to the ferroelectric‐paraelectric phase transition, as predicted. These results support the validity of the multi‐domain model which provides the possibility to predict the behavior of clamped, piezoelectric PZT thin films, and design films with enhanced properties.

Multiaxial Behavior of Ferroelectric Ceramic PZT53

Uniaxial Electromechanical Behavior of Ferroelectric Ceramic PZT-53

Multiaxial Electromechanical Couple Behavior of Ferroelectric Ceramic Pzt53

AN EXPERIMENTAL INVESTIGATION INTO THE COMPLEX ELECTROMECHANICAL BEHAVIOR OF PZT53

Unraveling the nature of electric field- and stress- induced structural transformations in soft PZT by a new powder poling technique

Effect of Lateral Pressure on the Non-Linear Behaviour of Pzt Ceramics

Facile Preparation and Performance of Novel High-Tc Xbi(ni1/2ti1/2)o3-(1-x)pb(zr1/2ti1/2)o3 Piezoceramics

Electromechanical Coupling Properties of [001], [011] and [111] Poled Pb(Mg1/3Nb2/3)O3-0.32PbTiO3 Single Crystals

Realizing the invariant electrostrain response and low hysteresis via multicomponent coordination in Pb‐based ceramics

Unipolar Fatigue Behavior of BCTZ Lead‐Free Piezoelectric Ceramics

Crystal structure and actuation mechanisms in morphotropic phase boundary Pb(Zn 1/3 Nb 2/3 )O 3 ‐Pb(Zr 1/2 Ti 1/2 )O 3 piezoelectric ceramic

Enhanced Piezoelectricity by Polarization Rotation through Thermal Strain Manipulation in PbZr0.6Ti0.4O3 Thin Films

Strain Rate and Porosity Effect on Mechanical Characteristics and Depolarization of Porous Poled PZT95/5 Ceramics

Effects of Stress and Electric Field on the Electromechanical Properties of Pb(Mg1∕3Nb2∕3)O3–0.32PbTiO3 Single Crystals

Electrically induced strains and piezoelectric properties of thin layer ferroelectrics

Structural Contribution to the Ferroelectric Fatigue in Lead Zirconate Titanate (PZT) Ceramics

Mechanical Confinement: An Effective Way of Tuning Properties of Piezoelectric Crystals

Electromechanical Properties of [0 0 1], [0 1 1] and [1 1 1] Oriented Pb(Mg1/3Nb2/3)O3–0.32PbTiO3 Crystals under Uniaxial Stress

Measurement of Transverse Piezoelectric Coefficients of Pb(Zr0.52Ti0.48)O3 Thin Films by a Mechano-electrical Multiphysics Coupling, Bulge Test Method

Polarity Modulation Induced High Electrostrain Performance with Near-Zero Hysteresis in a (Sr0.7bi0.2□0.1)tio3-Based System

Electric Fatigue of Pzt Piezoelectric Ceramics under Bias and Unipolar Pulse Cycling Field