Abstract:Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, Ahead of Print. An effective virtual-target-based three-dimensional path-following algorithm is proposed for unmanned combat aerial vehicles, which extends from the planar [math] guidance. The separated implementation of the planar guidance law in two perpendicular planes provides the longitudinally-laterally decoupled acceleration commands. In order to obtain a non-unique virtual-target-point, a numerical iterative method using auxiliary path-related variables is proposed. Moreover, two protection improvements are discussed for real-word implementation: one involves the modification of adaptive [math] length for vehicle position far away from the desired path; the other involves a switching strategy for multi-segment paths. The improved algorithm eliminates complex coordinate transformation and easily connects different types of path segments. For the control loop, technology enhanced with the active disturbance rejection control was used to facilitate the design of a bank-to-turn autopilot. For the pitch and roll channels, a rate-damping augmentation loop was used first to transform the original system into a generalized plant. Then the second-order active disturbance rejection control was structured to estimate the total disturbance, including time-varying dynamics, model mismatch, and coupling of channels, making the system an ideal integral-series type. The non-smooth optimization technique in the H-infinity methodology was used to facilitate tuning of the fixed-structure active disturbance rejection control.

Analysis of Kill Probability Hitting the Target Vertically for the Television Homing UCAV

On trackability of a moving target by fixed-wing UAV using geometric approach

A Terminal Guidance Law for TV-Guided UCAV in Ground Attacking at Large Impact Angle

Evasive Probability Analysis of UCAV with Vector Thrust Against a Proportional Missile

Hierarchical Control Design for the Cooperative Target Enclosing Motion of Unmanned Surface Vehicle.

Optimal Guidance Law and Control of Impact Angle for the Kinetic Kill Vehicle

Image-Based Visual Servo Tracking Control of a Ground Moving Target for a Fixed-Wing Unmanned Aerial Vehicle

A Vision-based UAV Tracker Aiming at Aerial Targets

Research on Kill Probability when Considering the Target’s Pose

The Variable Universe Fuzzy Controller and Its Application in Missile Homing Guidance Law Design

A Geometry-Based Guidance Law to Control Impact Time and Angle under Variable Speeds

Miss Distance Simulation for Kinetic Kill Vehicle Intercepting Tactical Ballistic Missile

Research on Guidance and Control Method of Hypersonic UAV Capture Segment Based on Overload

Autonomous control of UAV trajectory based on RHC-Radau method in complex penetration combat environment

Modeling and simulation of hit accuracy of EFP destruction element under disturbance conditions of UAV

A Terminal Guidance Law Design Applied to Space-to-surface Precision Attack Weapons

Impact Angle Control Guidance to Intercept Moving Targets by Virtual Target Technique

Research and Flight Test on the Terminal Guidance Control Technology for Cruising Unmanned Aerial Vehicles

Real-Time Path Planning Based on the Situation Space of UCAVs in a Dynamic Environment

Practical three-dimensional path following and control for unmanned combat aerial vehicles based on expansion of L1+ guidance logic and disturbance rejection

Path-following Control for Fixed-Wing Unmanned Aerial Vehicles Based on a Virtual Target