Abstract:A functional composite adsorbent of copper sulfide (CuS) loaded on the multi-walled carbon nanotubes (MWCNTs) was successfully synthesized and used for gaseous elemental mercury (Hg0) removal. The mercury removal performance and mechanism over CuS/MWCNTs was systematically studied based on a series of experimental characterizations and density functional theory calculations. The prepared CuS/MWCNTs showed excellent elemental mercury removal ability, and the best adsorption efficiency was achieved when the loading ratio was 10% and the reaction temperature was 70℃, with an average mercury removal efficiency of 85.8% in 2 h. SO2, NO, and H2O played an inhibitory role on the mercury removal over CuS/MWCNTs. Whereas, O2 had a certain promoting effect on Hg0 removal. The TPD desorption curves and XPS analysis results showed that the Hg0 in the flue gas was attached to the adsorbent surface in the form of HgS. Density functional theory analysis showed that Hg0 was physically adsorbed in the MWCNTs, which explains low Hg0 removal efficiency of pure MWCNTs. While the chemisorption mechanism dominated the strong Hg0 adsorption on CuS surface, accompanied by the formation of oxidized HgS, which was consistent with the experimental results. Combined with the macro and micro methods, this work provides an insight into the adsorption and oxidation mechanism of elemental mercury over the CuS/MWCNTs sorbent, which can guide further sorbent designs with targeted active sites and functional groups.

Adsorption characteristics of oxidized carbon nanotubes for mercury(Ⅱ) removal from aqueous solution

Adsorption and removal mechanism of Pb(II) by oxidized multi-walled carbon nanotubes

Adsorption of Cadmium(ii) from Aqueous Solution by Surface Oxidized Carbon Nanotubes

Adsorption of Tetracycline from Aqueous Solutions Onto Multi-Walled Carbon Nanotubes with Different Oxygen Contents

Facilitated Adsorption of Mercury(II) and Chromium(VI) Ions over Functionalized Carbon Nanotubes

Effect of Oxidation Treatment on the Adsorption and the Stability of Mercury on Activated Carbon.

The removal of U(VI) from aqueous solution by oxidized multiwalled carbon nanotubes.

Adsorption characteristic of acidified carbon nanotubes for heavy metal Pb(II) in aqueous solution

Removal of Heavy Metals from Aqueous Solution by Carbon Nanotubes: Adsorption Equilibrium and Kinetics.

Removal of Cu2+ Ions from Aqueous Solutions by Carbon Nanotubes

Adsorption of Cesium (I) from Aqueous Solution Using Oxidized Multiwall Carbon Nanotubes

Removal of Pb2+ and Cd2+ from Aqueous Solution Using Thiol-Functionalized Multi-Walled Carbon Nanotubes As Adsorbents

Synthesis and Characterization of Dithiocarbamate Carbon Nanotubes for the Removal of Heavy Metal Ions from Aqueous Solutions

Adsorption Of Cu(Ii) On Oxidized Multi-Walled Carbon Nanotubes In The Presence Of Hydroxylated And Carboxylated Fullerenes

Iron Oxide Supported Sulfhydryl-Functionalized Multiwalled Carbon Nanotubes for Removal of Arsenite from Aqueous Solution

Performance and mechanism of CuS-modified MWCNTs on mercury removal: Experimental and density functional theory study

Synergistic Effects of Multi-Walled Carbon Nanotubes and Mn0.4Cu0.6Fe2O4 on Mercury Removal with High Efficiency and Sulfur Resistance

Isotherm, kinetic, and thermodynamic studies on Hg(II) adsorption from aqueous solution by silica- multiwall carbon nanotubes

Efficient removal of heavy metal ions by thiol-functionalized superparamagnetic carbon nanotubes

Influence of Surface Oxidation of Multiwalled Carbon Nanotubes on the Adsorption Affinity and Capacity of Polar and Nonpolar Organic Compounds in Aqueous Phase.

Removal of Cu(Ii) from Aqueous Solutions by Tartaric Acid Modified Multi-Walled Carbon Nanotubes