Abstract:The unstable solids circulation behavior in a circulating fluidized bed (CFB) with sweeping bend return is investigated by monitoring pressure fluctuations in a bench-scale model. The pressure fluctuations at the top and bottom of the riser and downer are processed using the Fast Fourier Transform (FFT) technique to extract the dominant frequency and its amplitude in order to quantify the effects of riser inlet gas velocity, valve opening and bed inventory on the operation of the unit. The differential pressure drop fluctuations between riser and downer are processed in a similar manner. The study reveals that the unstable solids circulation behavior is cyclical vis-a-vis gas–solids flow pattern and solids exchange between riser and downer, named as solids oscillation circulation behavior. A dominant frequency of 0.25Hz is observed for all pressure fluctuation signals corresponding to the cyclical change of bed inventory and gas flow rate in riser and downer induced by the oscillation circulation behavior. An additional dominant frequency for the pressure fluctuation signals at the riser and downer bottom is also observed related to the gas–solid flow pattern. The solids exchange frequency is strongly related to the dominant frequency of the differential pressure drop. The work also demonstrates that the oscillation behavior is activated by a critical inlet gas velocity or valve opening and that the oscillation frequency increases with the decrease of inlet gas velocity, while it does not change with the valve opening. The solids exchange amount decreases with the decrease of gas flow and small percentage valve opening. The oscillation behavior changes from sine model to rectangular with the increase of bed inventory and thus slugging solids circulation is established.

Flow characteristics of the liquid–solid circulating fluidized bed

Experimental and numerical investigation of solid behavior in a gas–solid turbulent fluidized bed

Characterization of Flow Pattern of Cohesive Particles in Gas-Solid Fluidized Bed Via Axial Distribution of Particle Motions

Flow Regime Transition and Liquid Distribution in a 3D Concurrent Downflow Three-Phase Moving Bed

Experimental research on solids oscillation circulation behavior in circulating fluidized bed

Investigation on gas-liquid-solid circulating fluidized bed

Investigation of Particle Flow Behaviors in a Simplified Downcomer of Multistage Fluidized Bed

Particle Fluidization Characteristics and Transition in a Hot Gas-Solid Fluidized Bed with Liquid Injection

CFD Simulation and Experiments of Dynamic Parameters in Gas–solid Fluidized Bed

Stable Operating Range and Solids Residence Time of Fine Fluorite Particles in the Two-Stage Fluidized Bed

CFD Simulation and Hydrodynamics Characterization of Solids Oscillation Behavior in a Circulating Fluidized Bed with Sweeping Bend Return

Flow regimes in circulating fluidized beds

Hydrodynamics of a Gas-Liquid-solid Three Phase Circulating Fluidized Bed

COMPLEX STUDY OF FLOW REGIME CHARACTER AND IDENTIFICATION IN THE GAS-SOLID FLUIDIZED BED

Dynamic Characteristics of Solids Circulation Establishment in Laboratory and Industrial Circulating Fluidized Beds with Sweeping Bend Return

Investigation of Unstable Solids Circulation Behavior in A Circulating Fluidized Bed with Sweeping Bend Return Using Pressure Frequency Analysis

Phase Holdup and Liquid Dispersion in Gas-Liquid-Solid Circulating Fluidized Beds

Hydrodynamics of a bubble-driven liquid-solid fluidized bed

Liquid dispersion in gas-liquid-solid circulating fluidized beds

Experimental Research on the Gas-Solid Flow Characteristics in Large-Scale Dual Fluidized Bed Reactor

Mass flux profiles and flow regimes in a high density circulating Fluidized bed