Abstract:Surface roughness involved in elastic adhesion of solids may lead to an unstable loading process, which makes experimental characterization and theoretical modeling full of challenge. The full self-consistent model (FSCM) is the most accurate adhesion contact model in the continuum framework, but the strongly nonlinear coupling relationship between surface gap and interaction is very difficult to solve even with high-precision numerical calculation. In this paper, several techniques including the arc-length control method, the Riemann?Stieltjes integral, the adaptive mesh and the Newton?Raphson iterative method were employed in a new solving program to overcome the difficulty of numerical calculation. This calculation method has high efficiency and precision, and it gives a full force?displacement curve containing all possible stable and unstable equilibrium states. The full force?displacement curves for the adhesive contact of wavy surfaces are zigzag and some additional oscillations or minor roundabouts are observed, which have not been detected in the extended JKR and Maugis?Dugdale models. With the increase of surface roughness, the pull-off force first increases and then decreases, because the adhesion mode transforms from the simple contact mode to the multiple one. It is found that the pressure oscillation induced by waviness leads to interface strengthening for small roughness, and the limitation of the theoretical strength and the development of interface cavitation result in interface weakening for large roughness. Compared to the FSCM, the JKR theory significantly overestimates the pull-off forces for large surface roughness. The extended Maugis?Dugdale model is also invalid for large roughness, and if the step cohesive stress is determined by applying a condition of the identical pull-off force at the rigid limit, it can work well for small roughness.

Adhesion force spectroscopy of model surfaces with wettability gradient

Wettability Model for Various-Sized Droplets on Solid Surfaces

J0230203 Analytical consideration of droplet wettability on solid surfaces

Anisotropic Wettability of Bioinspired Surface Characterized by Friction Force

Wet adhesion on rough surfaces: A JKR model with thermodynamic considerations

Wettability Model for Water-Ethanol Binary Mixture Droplet on Roughened Low-Surface-energy Solids

Combined Dry and Wet Adhesion Between a Particle and an Elastic Substrate.

Investigation on the intrinsic wetting thresholds of liquids by measuring the interaction forces of self-assembled monolayers

Adhesion Forces Between a Parabolic-Shaped AFM Tip Scanning a Grooved Gold Surface: Comparison of a Model and an Experiment

Quantitative characterization of surface wettability by friction force

Mapping micron-scale wetting properties of superhydrophobic surfaces

Surface Wettability Effect on Aqueous Lubrication: Van Der Waals and Hydration Force Competition Induced Adhesive Friction

Modeling and Measurement on the Sliding Behavior of Microgrooved Surfaces.

Adhesion of Elastic Wavy Surfaces: Interface Strengthening/weakening and Mode Transition Mechanisms

Why Are Superhydrophobic Surfaces So Sticky? the Crucial Roles of Van Der Waals Force at Nanoscale in Wet Adhesion

Analytical Modeling of Wetting Dependence on Surface Nanotopography

Surface Wetting Study via Pseudocontinuum Modeling

Quantifying surface wetting properties using droplet probe AFM

Bi-Gaussian Stratified Wetting Model on Rough Surfaces.

Dynamic Adhesion Forces Between Microparticles And Substrates In Water

Wetting behavior of nanodroplets with low surface tension on pillar-type nanostructured substrates: Molecular dynamics simulations