Abstract:Although there has been great progress, the commercialization of proton exchange membrane fuel cells (PEMFCs) is still hindered by high cost due to the use of Pt catalysts. Furthermore, structural improvement of the catalyst layers is limited by inadequate studies of the ultrathin perfluorosulfonic acid ionomer (e.g., Nafion ionomer) film in the catalyst layers. During the preparation of the catalyst ink, the dispersion solvent affects the morphology of Nafion ionomers, which affects the microstructure and proton conduction behavior of the Nafion thin film wrapped on the surface of the catalyst particles after the catalyst layer is formed. To simulate the aggregation of ionomers in the catalyst layer, a self-assembly technology was used to obtain nanoscale Nafion thin films with precise and controllable thickness on a SiO2 model substrate. The proton conductivity and microstructure of the Nafion thin films were obtained through electrochemical impedance spectroscopy and a series of micro-characterization methods. Furthermore, the relationship between proton conduction behavior within ultrathin Nafion films and colloidal morphology in Nafion solution was studied using different organic solvents. The goal was to explore and establish the microstructure model of nanoscale Nafion thin films through micro-characterization technologies, such as nuclear magnetic resonance and dynamic light scattering. It was found that at the nanoscale, Nafion thin films (similar to 40 nm) result in low proton conductivity; an order of magnitude lower than that of bulk membranes (similar to 10-100 mu m). However, replacing iso-propanol with n-butanol (which has a lower dielectric constant) as the dispersion media of the Nafion ionomer improved the proton conductivity of the Nafion thin films. This is because Nafion in solvents with a lower dielectric constant possesses higher main chain solubility and mobility. Thus, Nafion molecules more easily aggregate into large rod-shaped micelles, which is beneficial to the construction of proton conduction channels after the self-assembly process. Furthermore, the electrostatic force between Nafion aggregates and the substrate in solvents with lower dielectric constant is smaller. This means more sulfonic groups are involved in the formation of proton conduction channels that in turn improve the proton conductivity of the Nafion thin film. In general, Nafion in solvents with lower dielectric constant leads to a structure that can facilitate proton conduction. This study provides guidance for optimizing the structure of ultrathin Nafion films and improving the proton conduction in the catalyst layers of PEMFCs.

Effects of Casting Solvent on Microstructrue and Ionic Conductivity of Anhydrous Sulfonated Poly(ether Ether Ketone)-Inoic Liquid Composite Membranes

Effects of Microstructure on the Retention of Proton Conductivity of Nafion/SiO2 Composite Membranes at Elevated Temperatures:An in Situ SAXS Study

Study of High Performance Sulfonated Polyether Ether Ketone Composite Electrolyte Membranes

Composite Membranes from Quaternized Chitosan Reinforced with Surface-Functionalized PVDF Electrospun Nanofibers for Alkaline Direct Methanol Fuel Cells

Effects of polymer structure on properties of sulfonated polyimide/protic ionic liquid composite membranes for nonhumidified fuel cell applications

Influence of Casting Conditions on the Properties of Sulfonated Poly(ether Ether Ketone Ketone)/phosphotungstic Acid Composite Proton Exchange Membranes

Synthesis of Sulfonated Poly(Imidoaryl Ether Sulfone) Membranes for Polymer Electrolyte Membrane Fuel Cells

Properties and DMFC performance of nafion/mordenite composite membrane fabricated by solution-casting method with different solvent ratio

Molecular Dynamics Simulation of the Mechanical Properties and Thermal Conductivity of Aromatic Electrolytes in Proton Exchange Membrane Fuel Cells

Evaluation of sulfonated chitosan-g-sulfonated polyvinyl alcohol/polyethylene oxide/sulfated zirconia composite polyelectrolyte membranes for direct borohydride fuel cells: Solution casting against the electrospun membrane fabrication technique

The Effects of Temperature and Humidity on the Microstructure of Sulfonated Syndiotactic–polystyrene Ionic Membranes

Effects of Dispersion Solvents on Proton Conduction Behavior of Ultrathin Nafion Films in the Catalyst Layers of Proton Exchange Membrane Fuel Cells

Synergistic Effect of 2-Acrylamido-2-methyl-1-propanesulfonic Acid on the Enhanced Conductivity for Fuel Cell at Low Temperature

Influence of the Inclusion of Propylene Carbonate Electrolyte Solvent on the Microstructure and Thermal and Mechanical Stability of Poly(l-lactic acid) and Poly(vinylidene fluoride- co-hexafluoropropylene) Battery Separator Membranes

Effect of sulfonation degree on molecular weight, thermal stability, and proton conductivity of poly(arylene ether sulfone)s membrane

Proton Transport, Electroosmotic Drag and Oxygen Permeation in Polytetrafluoroethylene Reinforced Ionomer Membranes and Their Effects on Fuel Cell Performance

Composite Proton Conductive Membranes for Elevated Temperature and Reduced Relative Humidity PEMFC

Solvent Effects on the Catalyst Ink and Layer Microstructure for Anion Exchange Membrane Fuel Cells

SCTF Nanosheets@sulfonated Poly (P-Phenylene-co-aryl Ether Ketone) Composite Proton Exchange Membranes for Passive Direct Methanol Fuel Cells

Effects of Solvent in the Casting of Poly(1-Trimethylsilyl-1-propyne) Membranes

Proton Conducting, Composite Sulfonated Polymer Membrane for Medium Temperature and Low Relative Humidity Fuel Cells