Abstract:Carbon-fiber reinforced plastic (CFRP) is ideal for bridge reinforcement due to its high strength, light weight, and corrosion resistance. Studies on the friction loss of CFRP tendons in a bending state form an important part of advancing the application of CFRP materials to external prestressing strengthening technology. To understand the magnitude and variation of interfacial friction loss of prestressed CFRP tendons under bending conditions, 12 single-bending prestressing tension tests and 4 three-consecutive-bending prestressing tension tests were conducted in this study. Two bending radii of 1.5 m and 2 m, two bending angles of 20° and 30°, and three contact surfaces with different friction coefficients were selected for the steering block condition to measure the friction loss under each stage of tensioning prestress. On this basis, a model for calculating the friction loss rate on the surface of prestressed CFRP tendons was derived for the change of contact stress between CFRP tendons and deflectors during the installation and tensioning stages. The results show that the friction loss of external prestressed CFRP tendons is mainly related to four external factors: bending radius, steering angle, friction coefficient, and the magnitude of tensioning prestress; with the increase of prestress, the friction loss rate goes through three stages, the rising stage, the falling stage, and the stable stage; in the process of friction loss rate change, the main influencing factor controlling the magnitude of friction loss rate changes from bending radius to steering angle. In the theoretical calculation model of friction loss rate, the calculation model of the prestressed CFRP tendons under multiple successive bends can be simplified to a combination of several calculation models for a single bend. This study provides a reference for the engineering field of strengthening reinforced concrete (RC) beams using external prestressed CFRP tendons.

Calculation Methods for Deflections of Concrete Beams Prestressed with Bonded FRP Tendons

Shear Design Method for Non-Prismatic Concrete Beams Reinforced Using W-FRP

EXPERIMENTAL STUDY ON FLEXURAL BEHAVIOR OF REINFORCED CONCRETE BEAMS PRE-STRESSED WITH CFRP TENDONS

Bending Stiffness of Steel-Concrete Composite Beams Considering Effect of Slip

Flexural capacity of concrete beams prestressed with carbon fiber reinforced polymer (CFRP) tendons

Predicting deflection of retrofitted reinforced concrete beams

Finite Element Modeling of Concrete Beams Prestressed with External Tendons

Theoretical Study on Prestress Loss in Cross-Tensioned Concrete Pavement with BFRP Tendons

Numerical Study of Using FRP and Steel Rebars in Simply Supported Prestressed Concrete Beams with External FRP Tendons.

Study on Prestressed Concrete Beams Strengthened with External Unbonded CFRP Tendons

STUDIES ON PRESTRESSING LOSS OF CONCRETE BEAMS PRESTRESSED WITH CFRP TENDONS

Effect of Tendon-Related Variables on the Behavior of Externally CFRP Prestressed Concrete Beams.

Deflection calculating method of damaged concrete beams strengthened with BFRP

Analysis of Design Method for Concrete Flexural Members Reinforced by FRP Bars

Flexural performance investigation of steel-concrete composite beams strengthened with prestressed CFRP tendons in the negative bending moment region

Flexural Strength Design of Hybrid FRP-Steel Reinforced Concrete Beams

Study on the deformation of hybrid BFRP-steel reinforced concrete beams considering crack development

Flexural property and design method evaluation of BFRP and steel bars hybrid reinforced concrete beams

Research on Moment Modification for Continuous Beams and Slabs Prestressed with Unbonded CFRP Tendons

Analysis and calculating method of flexural capacity of RC T-beams strengthened with prestressed CFRP sheets

The Interfacial Friction Loss of Prestressed Carbon-Fiber Tendons in a Bending State