Abstract:The ultrafine Ni–Co–B amorphous alloys with Co/(Co + Ni) molar ratio (χCo) varying from 0 to 1 was prepared by chemical reduction of mixed Ni2+ and Co2+ ions with BH4− in aqueous solution. During liquid phase acetonitrile hydrogenation to ethylamine, the specific activity (Rm) and the intrinsic activity (TON) of the Ni–Co–B catalyst first increased and then decreased with the increase of χCo from 0 to 1. The maximum activity was obtained at χCo = 0.5; the value of the activity was nearly twice as that of the Ni–B or the Co–B catalyst. Treatment of the Ni–Co–B catalyst at 873K resulted in an abrupt decrease in the activity due both to a decrease in active surface area and, especially, to the crystallization and the decomposition of the Ni–Co–B amorphous alloy. The selectivity to ethylamine increased rapidly with χCo and then remained constant at χCo ≥ 0.5. The maximum yield of ethylamine could reach 93%, showing a good potential for industrial applications. According to kinetic studies and results of various characterization methods, such as ICP, XRD, EXAFS, XPS, SAED, TEM, DSC, TPD, and hydrogen chemisorption, the correlation of the catalytic performance to both the structural and the electronic characteristics was discussed briefly. The activation of the CN and/or CN bonds, the promotion on the hydrogen adsorption, and the inhibition on the ethylamine adsorption were the decisive factors responsible for the excellent activity and selectivity of the Ni–Co–B catalyst.

Gas-phase hydrogenation of adiponitrile with high selectivity to primary amine over supported Ni-B amorphous catalysts

Liquid Phase Hydrogenation of Adiponitrile over Directly Reduced Ni/SiO2 Catalyst

Study on the Ni Supported Catalysts Used for Hydrogenation of IPN to Produce MXDA

Acid-Resistant Performance of Ni-Based Hydrogenation Catalysts Supported by Hydrophobic Activated Carbon

Synthesis of m-phenylenediamine from m-dinitrobenzene over silica-supported nickel catalyst

Hydrophobic activated carbon supported Ni-based acid-resistant catalyst for selective hydrogenation of phthalic anhydride to phthalide

Supported Ni Catalyst for Liquid Phase Hydrogenation of Adiponitrile to 6-Aminocapronitrile and Hexamethyenediamine.

Hydrogenation of M-Dinitrobenzene to M-Phenylenediamine over La2o3-Promoted Ni/Sio2 Catalysts

General Construction of Amine via Reduction of N=<i>X</i> (<i>X</i> = C, O, H) Bonds Mediated by Supported Nickel Boride Nanoclusters

Selective Hydrogenation of Adiponitrile over a Raney Ni–P Amorphous Catalyst

Highly efficient selective hydrogenation of adiponitrile to hexamethylene diamine over barium and melamine formaldehyde resin-modified nickel-cobalt-based zeolitic imidazolate framework-derived catalyst

Selective Hydrogenation of Adiponitrile over a Skeletal Ni–P Amorphous Catalyst (raney Ni–P) at 1atm Pressure

Liquid-Phase Hydrogenation of Nitrobenzene over Ag-Ni Bimetallic Catalysts Prepared by Adsorption Phase Synthesis

Selective Hydrogenation of Phthalic Anhydride to Phthalide over Supported Nickel Catalysts

Regulation of Ni/Al 2 O 3 catalysts by metal deposition procedures for selective hydrogenation of adiponitrile

Efficient hydrogenation of aliphatic acyclic amides to amines by bimetallic NiMo nitrides via heterogeneous catalysis

Highly selective hydrogenation of acetophenone over supported amorphous alloy catalyst

Liquid Phase Acetonitrile Hydrogenation to Ethylamine over a Highly Active and Selective Ni–Co–B Amorphous Alloy Catalyst

An efficient and stable LDH-derived Ni catalyst for highly selective hydrogenation of nitriles to primary amines

Regulating the coordination environment of Co@C catalysts for selective hydrogenation of adiponitrile to hexamethylenediamine

Synthesis of N , N -dimethyldodecylamine by the catalytic hydrogenation of N , N -dimethyldodecylamide