Abstract:In this study, a neural network approach is presented for the prediction and control of surface roughness in a computer numerically controlled (CNC) lathe. Experiments have been performed on the CNC lathe to obtain the data used for the training and testing of a neural network. The parameters used in the experiment were reduced to three cutting parameters which consisted of depth of cutting, cutting speed, and feed rate. Each of the other parameters such as tool nose radius, tool overhang, approach angle, workpiece length, workpiece diameter and workpiece material was taken as constant. A feed forward multi-layered neural network was developed and the network model was trained using the scaled conjugate gradient algorithm (SCGA), which is a type of back-propagation. The adaptive learning rate was used. Therefore, the learning rate was not selected before training and it was adjusted during training to minimize training time. The number of iterations was 8000 and no smoothing factor was used. Ra, Rz and Rmax were modeled and were evaluated individually. One hidden layer was used for all models while the numbers of neurons in the hidden layer of the Ra model were five and the numbers of neurons in the hidden layers of the Rz and Rmax models were ten. The results of the neural network approach were compared with actual values. In addition, inasmuch as the control of surface roughness is proposed, a control algorithm was developed in the present investigation. The desired surface roughness was entered into the control system as a reference value and the controller determined the cutting parameters for these surface roughness values. A new surface roughness value was determined by sending the cutting parameters to the observer (ANN block). The obtained surface roughness was fed back to the comparison unit and was compared with the reference value and the difference surface roughness was then sent to the controller. The iteration was continued until the difference was reduced to a certain value of surface roughness which could be permitted for machining accuracy. When the surface roughness reached the permitted value, these cutting parameters were sent to the CNC turning system as input values. In conclusion, both the surface roughness values corresponding to the cutting parameters and suitable cutting parameters for a certain surface roughness can be determined prior to a machining operation using the ANN and control algorithm.

Research on the Working Performance of the Reciprocating Cutterbar Based on ANN

Research on Intelligent Monitoring Technique of Machining State for Surface Grinder Based on Bayesian Network

Modeling and process parameter optimization of laser cutting based on artificial neural network and intelligent optimization algorithm

Milling wear prediction using an artificial neural network model

Prediction of optimum CNC cutting conditions using artificial neural network models for the best wood surface quality, low energy consumption, and time savings

Study on Analytical Model of Surface Roughness Prediction in NC Machining

Intelligent Prediction for Surface Roughness of Cnc Surface Grinding Machine Tool Based on Bayesian Network

An improved case-based reasoning method and its application to predict machining performance

Optimizing the Laser-Cutting Parameters by Using Improved Artificial Neural Network

Predictive 3D modelling of free oblique cutting introducing an ANN-based material flow law with experimental validation over a wide range of conditions

Parameters Optimization of Fast-Cutting Wire-Cut Electrical Discharge Machining Process

Determination of tool tip steady-state temperature in dry turning process based on artificial neural network

The Tool Wear and Breakage Monitoring in Turning Using Neural Network

Research and Development on Intelligent Cutting Tools with Capability of On-line Monitoring and Prediction

A comprehensive approach to enhance wood cutting productivity: Integration of spherical fuzzy DEMATEL and artificial neural networks

Prediction and control of surface roughness in CNC lathe using artificial neural network

Prediction on the Ablative Performance of Carbon/carbon Composites Based on Artificial Neutral Network

Research on Performance Evaluation Method of Rice Thresher Based on Neural Network

Prediction and Control of Surface Roughness for the Milling of Al/SiC Metal Matrix Composites Based on Neural Networks

Using Neural Networks for Tool Wear Prediction in Computer Numerical Control End Milling

Carbide Tool Life Prediction and Modeling in SiCp/Al Turning Process Via Artificial Neural Network Approach