Abstract:Magnetic invisible cloaking has been previously demonstrated but only limited to objects with rotational geometries either in spherical or cylindrical shapes, for which the classic analytical bilayer scheme could be strictly applied to design the hiding coat. In this work, we show that a quasi-static cloaking effect could be achieved for irregular objects, e.g., metals with sharp edges, using a numerical optimization scheme. In the quasi-static limit, it is unambiguously proved that the disturbance of the irregular geometries could be well compensated by the inhomogeneous distribution of the soft ferromagnetic (FM) layer either in permeability values or in shapes under the framework of a bilayer cloak. An FM mesh coat with a constant thickness of 0.5 mm was successfully engineered to meet the specific requirements. Experimentally, good cloaking performance with a field disturbance of less than 0.5% has been achieved for a 2 × 2 × 5 cm3 brass bar in a wide frequency range from ∼10 to 250 kHz. A commercial metal scanner was also applied to verify the practical potential. The general strategy to hide almost arbitrary objects was discussed in the end. In principle, the numerical conformal coat engineered by the composite material proposed here could be broadly extended for objects with various geometries.

CLOAK FOR BIANISOTROPIC AND MOVING MEDIA

A Multi-Cloak Bifunctional Device

Perfect Invisibility Cloaking by Isotropic Media

Homogeneous Anisotropic Dielectric Invisibility Carpet Cloak Made of Al2o3 Plates

Ultrathin Conformal Magnetic Invisible Cloak for Irregular Objects.

Ellipsoidal Cloak for Inhomogeneous Medium

Cloak for Multilayered and Gradually Changing Media

Cloak Changing with Background

Time Domain Study of Electromagnetic Cloaks for Wideband Invisibility under Transient Illumination

A Bifunctional Cloak Using Transformation Media

Homogenous isotropic invisible cloak based on geometrical optics.

The Scattering of a Cylindrical Invisibility Cloak: Reduced Parameters and Optimization

Investigation of the Far/Near-Field Properties of the Inhomogeneous and Anisotropic Invisible Cloak Covered Pec Cylinder Illuminated by the Parallel Electric-Line-Source

Complementary medium cylindrical cloak with spatially invariant axial material parameters

Electromagnetic Cloaking by Layered Structure of Homogeneous Isotropic Materials

Experimental investigation of omnidirectional multiphysics bilayer invisibility cloak with anisotropic geometry

Designing the Coordinate Transformation Function for Non-Magnetic Invisibility Cloaking

A Unidirectional Acoustic Cloak for Multilayered Background Media with Homogeneous Metamaterials

Spherical Cloaking with Homogeneous Isotropic Multilayered Structures

Three-dimensional Invisible Cloaks with Arbitrary Shapes Based on Partial Differential Equation

Multifrequency Cloak With Multishell By Using Transformation Medium