Abstract:The use of solid electrolytes in lithium-ion batteries (LIBs) instead of their liquid counterparts may significantly increase their energy density. Of particular interest are solid composite electrolytes (SCEs) which can be synthesized by incorporating ionic liquids (ILs, salts with a melting point lower than 100 °C) into a solid matrix. This class of SCE can have a wide electrochemical stability window and is typically non-flammable. Chen et al. 1 developed an SCE with excellent ionic conductivity, consisting of a mesoporous silica monolith which encloses an IL electrolyte (solid nanocomposite electrolyte or nano-SCE). It is formed from a precursor solution which does not contain acids such as formic acid or HCl, meaning that it can be impregnated into porous electrodes without causing damage to the latter. However, its gelation process is long and variable (5-9 days), and is considerably affected by its presence within the electrode. As such, the nano-SCE has poor manufacturability and is not compatible with the continuous roll-to-roll processing typically used for LIB manufacturing. The manufacturability of the nano-SCE can be significantly improved by making its solidification process instantaneous upon subjection to an external trigger. As such, organic modification was used to produce silica-based precursor solutions capable of triggered solidification, for instance by irradiation with UV light. This solidification process takes a few minutes to complete and does not depend on pH, rendering it particularly versatile. The aging of the precursor solutions was studied with 29 Si, 1 H, and 13 C NMR spectroscopy, which revealed that the alkoxysilane precursor molecules condensed into larger soluble structures over the course of five weeks. The aged precursor solutions remained stable over an indefinite period of time. When a photo-initiator is added to these solutions and they are irradiated with UV light, the soluble structures are linked together, resulting in the formation of silica nanoparticles which subsequently aggregate into a porous matrix which encapsulates the ionic liquid electrolyte (ILE). The adaptation does not compromise the functional properties such as ionic conductivity or electrochemical stability. As determined with Raman spectroscopy, the extent of organic modification and amount of ILE can be optimized to decrease the interaction of lithium ions with the other ions as compared to the neat ILE. The increased Li + mobility means that the SCE can reach higher ionic conductivity (2.7 mS cm -1 at 20 °C) values than the neat ILE (2.5 mS cm -1 ). Anodic and cathodic linear sweep voltammetry in three-electrode cells was performed to determine that the SCEs can have an electrochemical stability window exceeding 5 V (i.e. lithium plating 5.0 V vs Li + /Li). Electrochemical impedance spectroscopy further confirmed the SCE’s compatibility with lithium metal. As no acids are added to the precursor solution, a good electrode compatibility is expected. As such, the precursor solutions were impregnated into NMC622-based electrodes, solidified, and incorporated in half cells. These cells had an initial discharge capacity of 162 mAh g -1 at 0.1 C, retaining 86.8% of this capacity after 100 cycles. This work was supported by funding from the European Union’s Horizon 2020 research and innovation program for the Solidify project under grant agreement No. 875557. (1) Chen, X.; Put, B.; Sagara, A.; Gandrud, K.; Murata, M.; Steele, J. A.; Yabe, H.; Hantschel, T.; Roeffaers, M.; Tomiyama, M.; et al. Silica Gel Solid Nanocomposite Electrolytes with Interfacial Conductivity Promotion Exceeding the Bulk Li-Ion Conductivity of the Ionic Liquid Electrolyte Filler. Sci. Adv. 2020 , 6 (2). https://doi.org/10.1126/sciadv.aav3400.

Preparation of Nanohybrid Solid-State Electrolytes with Liquidlike Mobilities by Solidifying Ionic Liquids with Silica Particles

Comparative Studies on Electrochemical Cycling Behavior of Two Different Silica-Based Ionogels

Sol-gel Preparation of Ag-silica Nanocomposite with High Electrical Conductivity

Impact of nanoconfinement on the physical state and conductivity mechanisms of a 2-picolinium ionic liquid crystal

Hybrid organic-inorganic nano-composites for solid-state battery electrolytes

Silica gel solid nanocomposite electrolytes with interfacial conductivity promotion exceeding the bulk Li-ion conductivity of the ionic liquid electrolyte filler

Effect of Preparation Methods on the Interface of LiBH4/SiO2 Nanocomposite Solid Electrolytes

Preparation and Characterization of Silica-Based Ionogel Electrolytes and Their Application in Solid-State Lithium Batteries

Interfacial Conductivity Enhancement and Pore Confinement Conductivity-Lowering Behavior inside the Nanopores of Solid Silica-gel Nanocomposite Electrolytes

Ionic Liquid-Tethered Nanoparticle Suspensions: A Novel Class of Ionogels

Can Silica Nanoparticles Improve Lithium Transport in Polymer Electrolytes?

A highly conductive quasi-solid-state electrolyte based on helical silica nanofibers for lithium batteries

Ionic Liquid-Nanoparticle Hybrid Electrolytes

High Tensile Strength and High Ionic Conductivity Bionanocomposite Ionogels Prepared by Gelation of Cellulose/Ionic Liquid Solutions with Nano-Silica

A novel polymer gel electrolyte: Direct polymerization of ionic liquid from surface of silica nanoparticles

Solidification of a Silica-Based Solid Composite Electrolyte for Lithium-Ion Batteries Induced By UV Irradiation

The Origins of Ion Conductivity in MOF-Ionic Liquids Hybrid Solid Electrolytes

Ionic-liquid Functionalized Metal-organic Framework and Its High Performance Solid Electrolyte for Lithium-ion Conduction

Hydrated Silicate Ionic Liquids: Ionic Liquids for Silicate Material Synthesis

Hybrid Electrolyte Based on PEO and Ionic Liquid with In Situ Produced and Dispersed Silica for Sustainable Solid-State Battery