Abstract:The blends composed of polyamide 6 (PA6) and polyamide 66 (PA66) were obtained using two different preparation methods, one of which was the melt-mixing through a twin-screw extruder and the subsequent injection molding; and the other, the in situ blending through anionic polymerization of epsilon-caprolactam in the presence of PA66. For the former, there existed a remarkable improvement in toughness but a drastic drop in strength and modulus; however, for the latter, a reverse but less significant trend of mechanical properties change appeared. Various characterizations were conducted, including the analyses of crystalline morphology, crystallographic for-in, and crystallization and melting behaviors using polarized optical microscopy (POM), wide-angle X-ray diffraction (WAXD), and differential scanning calorimetry (DSC), respectively; observation of morphology of fractured surface with scanning electron microscope (SEM); measurement of glass transition through dynamic mechanical analysis (DMA); and the intermolecular interaction as well as the interchange reaction between the two components by Fourier transform infrared spectrometry (FT-IR) and C-13 solution NMR. The presence and absence of interchange reaction was verified for the in situ and melt-mixed blends, respectively. It is believed that the transreaction resulted in a drop in glass transition temperature (T,) for the in situ blends, contrary to an increase of T, with increasing PA66 content for the melt-mixed ones. And the two kinds of fabrication methods led to significant differences in the crystallographic form, spherulite size and crystalline content and perfection as well. Accordingly, it is attempted to explain the reasons for the opposite trends of changes in the mechanical properties for these two blends. (c) 2007 Wiley Periodicals, Inc.

Study on in Situ Reinforcing and Toughening of A Semiflexible Thermotropic Copolyesteramide in Pbt/Pa66 Blends

Rheological Properties of PET/PA66/Liquid Crystalline Copolyesteramide Blends

Poly(L-Lactide) Materials with Balanced Mechanical Properties Prepared by Blending with Peg-Mb-Ppa Multiblock Copolymers

Preparation of PBT/POE‐g‐GMA/PP Ternary Blends with Good Rigidity–toughness Balance by Core–shell Particles

Study on Thermotropic Liquid Crystalline Copolyamide/Polyamide 66 In situ Composites

Structures and properties of ternary blends of recycled poly(ethylene terephthalate)/bisphenol-A polycarbonate/(E/nBA/GMA)

Mutual Nucleating and Crystallization Behavior of Poly (ethylene Terephthalate)/polyamide 66 Blends

Effect of addition of compatibilizer on mechanical, thermal and thermo-mechanical behavior of a polymer blend (PBT/ PBT(G)/ PTT) composite

Rheology of Poly(lactic Acid)/poly(trimethylene Terephthalate) Blends Compatibilized by Clay or Maleic Anhydride-Grafted Poly(ethylene-Octene) Elastomer

Toughening Modification of Poly(Butylene Terephthalate)/Polycarbonate Blends by Poly(Ethylene-Co-Octene)

Crystallization Behavior and Mechanical Properties of Polyamide 66/thermotropic Liquid Crystalline Copolyamide Blends

Toughening Modification of Poly(butylene Terephthalate)/poly(ethylene Terephthalate) Blends by an Epoxy-Functionalized Elastomer

Toughening modification of PBT/PC blends with PTW and POE

In-situ Compatible Composite of Nylon 66 and Thermotropic Liquid Crystalline Polyamide

Compatibilization And Toughening Of Immiscible Ternary Blends Of Polyamide 6, Polypropylene (Or A Propylene-Ethylene Copolymer), And Polystyrene

Ternary Polymer Composites: PA6,6/maleated SEBS/glass Beads

Toughening Modification of PLLA/PBS Blends Via in Situ Compatibilization

Influence of Preparation Methods on the Structures and Properties for the Blends Between Polyamide 6co6t and Polyamide 6: Melt‐mixing and In‐situ Blending

STUDY ON PHASE STRUCTURE AND MECHANICAL PROPERTIES OF PBT AND PA6 BLENDS

Influence of Preparation Methods on Structure and Properties of PA6/PA66 Blends: A Comparison of Melt‐mixing and in Situ Blending

3-Pentadecylphenol (PDP) as a Novel Compatibilizer for Simultaneous Toughened and Reinforced PA10,12 Composites