Factors affecting diesel oil removal from oil-contaminated soil

Ma Yanfei,Zheng Xilai,Feng Xuedong,Lu Jie,Li Menghong
2012-01-01
Abstract:Oil release process was measured in one-dimensional synthetic glass column,and diesel oil was the pollutant.The effects of pH,leaching velocity and surface active substances on oil removal rate were analyzed from the standpoint of oil-water interfacial tension(IFT).The results show that IFT decreases to some extent with extending oil-water contact time,rising or lowering the pH value of distilled water.The oil contamination of effluent is higher under low leaching velocity.But changing the solution pH causes little effect on oil removal rate.The IFT decreases drastically with the use of SDS or ethanol in water.The oil removal rate is significantly higher with surface active substances than with distilled water,and which increases with the increment of ethanol volume concentration.First-order kinetic equation can describe the relationship between oil concentration of effluent and the pore volume number.The cumulative released oil can be calculated by first-order kinetic equation.According to the cumulative released oil,the oil removal rate of 50% ethanol is the highest,and the 8 mmol/L SDS solution takes the second place.The oil removal rate is remarkable at the initial leaching stage,but the increasing rate of it declines gradually at the mid and late stage.
What problem does this paper attempt to address?