Abstract:A comparison between two types of adsorbent tubes, the commonly used Tenax TA and a multi-sorbent bed (Carbotrap, Carbopack X, Carboxen 569) tube developed in our laboratory, has been done to evaluate their usefulness in the analysis of VOCs in ambient air. Duplicate indoor and outdoor samples of Tenax TA and multi-sorbent tubes of 10, 20, 40, 60 and 90l were taken in Barcelona city (Spain) on July and October of 2009. Breakthrough values (defined as %VOCs found in the back tube) were determined for all sampling volumes connecting two sampling tubes in series. The analysis was performed by automatic thermal desorption (ATD) coupled with capillary gas chromatography (GC)/mass spectrometry detector (MSD). Significant differences between the concentrations obtained-from multi-sorbent bed and Tenax TA tubes are observed for the very volatile compounds (56 degrees C<boiling point<100 degrees C and 4kPa<vapour pressure (20 degrees C)<47kPa) (e.g. acetone, isopropanol, n-hexane) and for alcohols and chlorinated compounds (e.g. 1-butanol, carbon disulphide, dichloromethane, chloroform, carbon tetrachloride, trichloroethylene, tetrachloroethylene), being the concentrations found higher in multi-sorbent bed than in Tenax TA tubes. On the other hand, mainly all compounds with boiling points higher than 100 degrees C (except alpha-pinene, chlorinated and polar compounds) do not show significant differences between the obtained multi-sorbent bed and Tenax TA tube concentrations. For the concentrations obtained (5ppt to 100ppb), Tenax TA present high breakthrough values (from 0 to 77%) for mainly all compounds and sampling volumes studied. On the other hand, multi-sorbent bed tubes do not exhibit important breakthrough values for these compounds, except the VVOCs ethanol (for all sampled volumes), and acetone, dichloromethane and isopropanol (for sampling volumes over 40l). The concentration differences observed between Tenax TA and multi-sorbent bed tubes are directly related to the high breakthrough values determined for Tenax TA adsorbent.

Multi-layer Cartridges Filled with Multi-Walled Carbon Nanotubes for the Determination of Volatile Organic Compounds in Indoor Air

Sensors for Organic Vapor Detection Based on Composites of Carbon Nonotubes Functionalized with Polymers

Determination Of 67 Volatile Organic Compounds In Ambient Air Using Thermal Desorption-Gas Chromatography-Mass Spectrometry

Adsorption of Multicomponent VOCs on Various Biomass-Derived Hierarchical Porous Carbon: A Study on Adsorption Mechanism and Competitive Effect.

Comparative study on TPU/multi-walled carbon nanotubes conductive nanocomposites for volatile organic compounds sensor applications

Adsorption of selected volatile organic vapors on multiwall carbon nanotubes

Online Measurement of 1,2,4-Trichlorobenzene As Dioxin Indicator on Multi-Walled Carbon Nanotubes.

Hierarchical Porous Carbon As a Highly Efficient Adsorbent for Toluene and Benzene

Nanoporous Functionalized WS2/MWCNTs Nanocomposite for Trimethylamine Detection Based on Quartz Crystal Microbalance Gas Sensor

Application of Multiwalled Carbon Nanotubes As a Solid‐Phase Extraction Sorbent for Chlorobenzenes

Palladium-Doped Single-Walled Carbon Nanotubes as a New Adsorbent for Detecting and Trapping Volatile Organic Compounds: A First Principle Study

Enhanced Tolerance to Flue Gas Contaminants on Carbon Dioxide Capture Using Amine-Functionalized Multiwalled Carbon Nanotubes

High Specific Surface Area 2D/1D Hybrid Materials of Nb2CTx/CNT for Efficient VOCs Detection at Room Temperature

Study of VOCs Sensing Property of Carbon Nanotubes and Their Modified Nano-Composites

Unveiling the Role of Hydrophobicity on Multilayer Carbon Nanosheets Enriched in sp2-Carbon for Toluene Adsorption under Humid Conditions

Comparative study of the adsorption performance of a multi-sorbent bed (Carbotrap, Carbopack X, Carboxen 569) and a Tenax TA adsorbent tube for the analysis of volatile organic compounds (VOCs)

Extraction and determination of pesticide residues in water using carbon nanotubes coupled with gas chromatography-mass spectroscopy

Amine-functionalized Low-Cost Industrial Grade Multi-Walled Carbon Nanotubes for the Capture of Carbon Dioxide

A Room Temperature VOCs Gas Sensor Based on a Layer by Layer Multi-Walled Carbon Nanotubes/Poly-ethylene Glycol Composite

Competitive adsorption characteristics of VOCs and water vapor by activated carbon prepared from Fe/N-doped pistachio shell

Carbon Functionalized Mesoporous Silica-Based Gas Sensors for Indoor Volatile Organic Compounds