A simple design approach to analyse the piled embankment including tensile reinforcement and subsoil contributions
Yan Zhuang,Xiao-Yan Cui,Kang-Yu Wang,Jun Zhang
DOI: https://doi.org/10.1016/j.geotexmem.2020.10.014
IF: 5.839
2021-04-01
Geotextiles and Geomembranes
Abstract:<p>There is not one generally accepted approach for the design of geogrid-reinforced pile-supported (GRPS) embankments. Relevant mechanisms include arching of the embankment material, but also the effect of geogrid reinforcement and potentially a contribution from the underlying subsoil. This paper presents a simple design approach to identify the contribution of all three mechanisms, in which the contribution of multi-layered geogrid reinforcement is also presented. To validate the theoretical predictions for the effect of geogrid reinforcement and the potential contribution of underlying subsoil, a series of three-dimensional finite element analyses are conducted. It is found that a point of 'maximum arching' is increased with the height of embankment. This study also presents that the reinforcement could reduce the ultimate stress on the subsoil. However, this requires significant sag of the reinforcement. It is found that the sag of reinforcement is very sensitive to the span of the reinforcement between piles, but relatively insensitive to the stiffness of the reinforcement. For a case with three layers of geogrid, the upper two grids carry relatively little tension compared to the bottom layer. This in turn leads to an approximate but simple equation of vertical equilibrium which may be of use in design.</p>
geosciences, multidisciplinary,engineering, geological