Abstract:The Ce–Ga and Ga–Gd systems are critically assessed by means of the calculation of phase diagram (CALPHAD) technique. The excess Gibbs energy of the solution phases [liquid, orthorhombic (Ga), fcc (Ce), bcc (Ce or Gd), and hcp (Gd)] is modeled with the Redlich–Kister equation. In the Ce–Ga and Ga–Gd systems, the intermetallic compounds, CeGa, Ce3Ga2, Ce3Ga, α-CeGa6, β-CeGa6, GaGd, Ga6Gd, Ga2Gd3, and Ga3Gd5 are treated as stoichiometric compounds. The intermetallic compounds CeGa2 and Ga2Gd with a homogeneity range, are treated using a two-sublattice model as the formula (Ce,Ga)0.333333(Ce,Ga)0.666667, and (Ga,Gd)0.666667(Ga,Gd)0.333333, respectively. In the Ce–Ga system, there are nine invariant reactions, and five stoichiometric intermetallic compounds and the compound CeGa2 with a homogeneity domain ranging from about 66.67 to 77.94 at.% Ga. Some improvements are obtained based on the experimental data in the present work, the liquidus line is more close to the most experimental points, and the homogeneity range of the compound CeGa2 seems more reasonable at full temperature range. In the Ga–Gd system, there are eight invariant reactions, and four stoichiometric intermetallic compounds and the compound Ga2Gd with a homogeneity domain ranging from about 19.64 to 33.33 at.% Gd. The present phase diagram and thermodynamic properties of the system are well reproduced with the experimental data.

Thermodynamic Assessment of the Co–La and Mo–La Systems

Thermodynamic Re-Assessment of the Mn-La Binary System

Thermodynamic Calculation of Phase Equilibria in the C-Mo-Zr System

Mechanical And Thermodynamic Properties Of Mg17la2, La5si4 And La5sn3 Phases In Mg-Sn-Mn(Si)-La Alloy From First-Principles Calculations

First-principles calculations to investigate thermodynamic and mechanical behaviors of molybdenum-lanthanum alloy

First-Principles Study of Mechanical and Thermodynamic Properties of Binary and Ternary CoX (X = W and Mo) Intermetallic Compounds

Thermodynamic Modeling of the Ta–Mo–C Ternary System

CALPHAD-type Modeling of the C–Hf–Mo System over the Whole Composition and Temperature Ranges

Thermodynamic Description of Phase Equilibria in the C–Mo–W–N Quaternary System

First-principles and CALPHAD-type Study of the Ir-Mo and Ir-W Systems

Thermodynamic Description of the Ce–Ga and Ga–Gd Systems

Thermodynamic Basis and Related Phase Equilibria for In-Na and In-Ca Binary Systems

Thermodynamic Assessment of the Gd–Sb System

Thermodynamic Assessment of the Ag–Ga System

The Structural, Elastic And Thermodynamic Properties Of Intermetallic Phases In Mg-Sn-Si-Ca(Sr) Alloys: A First-Principles Study

Experimental investigation and thermodynamic modeling of the Mo-Co-B ternary system

Thermodynamic Assessment of the Nd–Zn System

First-principles Investigation of the Elastic and Electronic Properties of the Binary Intermetallics in the Al–La Alloy System

Combined experimental and computational assessment of the Li2O ‐La2O3 ═ZrO2 phase diagram

Critical assessment of Co-Cu phase diagram from first-principles calculations

Thermodynamic assessment of the Mo‐Si system