Skutterudite: Reproducibility of Thermoelectric Performance of P-type R y Fe 4-x Co x Sb 12 Bulky Compacts
Jin-Sol Kim,Dong-Kil Shin,Kwan-Ho Park,Il-Ho Kim
DOI: https://doi.org/10.3365/kjmm.2024.62.7.542
IF: 1.324
2024-07-05
Korean Journal of Metals and Materials
Abstract:Skutterudite compounds have excellent thermoelectric performance in the intermediate-to high temperature range. Their lattice thermal conductivity can be reduced by intensifying phonon scattering through independent vibrations of the guest atoms, by filling the voids within the lattice. Furthermore, the thermoelectric figure of merit (ZT) can be enhanced by optimizing the carrier concentration through charge compensation between transition elements. In this study, we compared the thermoelectric properties of p-type filled skutterudite materials, R y Fe 4-x Co x Sb 12 , where R represents rare-earth elements (La/Ce/Pr/Nd/Yb), which were filled in the voids, and Co was charge-compensated at the Fe site. In the case of La y Fe 4-x Co x Sb 12 , the introduction of La filling and Co doping led La 0.9 Fe 3 CoSb 12 to exhibit a high power factor and low thermal conductivity (ZT = 0.67 at 723 K). In the case of Ce y Fe 4-x Co x Sb 12 , in addition to Ce filling, the substitution of Co for Fe resulted in additional lattice scattering, leading to a decrease in thermal conductivity. However, CeFe 4 Sb 12 exhibited a maximum performance of ZT = 0.70 at 823 K. In the case of Pr y Fe 4-x Co x Sb 12 , the thermal conductivity was reduced through phonon scattering induced by Pr filling and additional lattice scattering caused by Co substitution; as a result, Pr 0.8 Fe 3 CoSb 12 exhibited ZT = 0.89 at 723 K. In the case of Nd y Fe 4-x Co x Sb 12 , the phonon scattering was enhanced by adjusting the filling of Nd and substitution of Co, resulting in a lower thermal conductivity; Nd 0.9 Fe 3.5 Co 0.5 Sb 12 exhibited ZT = 0.91 at 723 K. For Yb y Fe 4-x Co x Sb 12 , Yb 0.9 Fe 3 CoSb 12 exhibited a thermoelectric performance of ZT = 0.56 at 823 K. In addition, in this study, for the fabrication (application) of thermoelectric modules, the p-type Nd 0.9 Fe 3.5 Co 0.5 Sb 12 skutterudite, which exhibited the best thermoelectric performance, was prepared in bulky compacts to verify the uniformity and reproducibility of its thermoelectric performance.
materials science, multidisciplinary,metallurgy & metallurgical engineering