Abstract:Asynchronous circuits with low power and robustness are revived in emerging applications such as the Internet of Things (IoT) and neuromorphic chips, thanks to clock-less and event-driven mechanisms. However, the lack of mature computer-aided design (CAD) tools for designing large-scale asynchronous circuits results in low design efficiency and high cost. This article proposes an end-to-end bundled-data (BD) asynchronous circuit design flow, which can facilitate building asynchronous circuits, even if the designer has little or no asynchronous circuit foundation. Three features that enable this are: 1) a lightweight circuit converter developed in Python can convert circuits from synchronous descriptions to corresponding asynchronous ones at register transfer level (RTL). Desynchronization flow helps designers maintain a "synchronization mentality" to construct asynchronous circuits; 2) a synchronization-like verification method is proposed for asynchronous circuits so that it can be functionally verified before synthesis. Avoids the risk of rework after logic defects are discovered during the synthesis and implementation, as asynchronous circuits often cannot be simulated until gate-level (GL) netlist generation; and 3) the whole implementation flow from RTL to graphic data system (GDS) is based on commercial electronic design automation (EDA) tools. Similar to the design flow of synchronous circuits, it helps designers implement asynchronous circuits with "synchronization habits." Furthermore, to validate this methodology, two asynchronous processors were, respectively, implemented and evaluated in the TSMC 28-nm CMOS process. Compared to their synchronous counterparts, the general-purpose asynchronous RISC-V processor achieves 20.5% power savings. And the domain-specific asynchronous spiking neural network (SNN) accelerator achieves 58.46% power savings and 2.41x energy efficiency improvement at 70% input spike sparsity.

An asynchronous GALS wrapper based on standard logic cell

An Improved Asynchronous Wrapper for GALS

Design of Adiabatic FIFO Based on Clocked Transmission Gate Adiabatic Logic Circuit

GALS Network-on-Chip with a Distributed-Synchronous Mechanism

Asynchronous Techniques for System-on-Chip Design

General-Purpose Gate-Level Simulation with Partition-Agnostic Parallelism.

Design of Mixed Synchronous/Asynchronous Systems with Multiple Clocks.

TinyGALS

GALS Architecture of H.264 Video Encoding System on DN-DualV6-PCIe-4 FPGA Platform

A comparison of programmable gate array logic cell circuits

An Interface Design for Asynchronous Communication Between Core and Bus System

High Performance, Energy Efficiency, and Scalability with Gals Chip Multiprocessors

TinyGALS: A Programming Model for Event-Driven Embedded Systems.

A Low-Area Multi-Link Interconnect Architecture for GALS Chip Multiprocessors

Simulation Framework of Digital Optical Phase-Locked Loop Model in Verilog HDL

An End-to-End Bundled-Data Asynchronous Circuits Design Flow: from RTL to GDS

GIB: A Novel Unidirectional Interconnection Architecture for FPGA

Universal GALS Platform and Evaluation Methodology for Networks-on-chip

Development of Standard Cell Library for UMC 0.18 μm Asynchronous Circuit

Specification And Analysis Of Ncl Circuits

A Design Flow for Click-Based Asynchronous Circuits Design with Conventional EDA Tools.