Abstract:OBJECTIVE:To analyze the stress distribution in the periodontal ligament (PDL) under different loading conditions at the stage of space closure by 3D finite element model of customized lingual appliances.METHODS:The 3D finite element model was used in ANSYS 11.0 to analyze the stress distribution in the PDL under the following loading conditions: (1) buccal sliding mechanics (0.75 N,1.00 N,1.50 N), (2) palatal sliding mechanics (0.75 N,1.00 N,1.50 N), (3) palatal-buccal combined sliding mechanics (buccal 1.00 N + palatal 0.50 N, buccal 0.75 N + palatal 0.75 N, buccal 0.50 N+ palatal 1.00 N). The maximum principal stress, minimum principal stress and von Mises stress were evaluated.RESULTS:(1) buccal sliding mechanics(0.75 N,1.00 N,1.50 N): maximum principal stress: at the initial of loading, maximum principal stress, which was the compressed stress, distributed in labial PDL of cervix of lateral incisor, and palatal distal PDL of cervix of canine. With increasing loa-ding, the magnitude and range of the stress was increased. Minimum principal stress: at the initial of loading, minimum principal stress which was tonsil stress, distributed in palatal PDL of cervix of lateral incisor and mesial PDL of cervix of canine. With increasing loading, the magnitude and range of minimum principal stress was increased. The area of minimum principal stress appeared in distal and mesial PDL of cervix of central incisor. von Mises stress:it distributed in labial and palatal PDL of cervix of lateral incisor and distal PDL of cervix of canine initially. With increasing loading, the magnitude and range of stress was increased towards the direction of root. Finally, there was stress concentration area at mesial PDL of cervix of canine. (2) palatal sliding mechanics(0.75 N,1.00 N,1.50 N): maximum principal stress: at the initial of loading, maximum principal stress which was the compressed stress, distributed in palatal and distal PDL of cervix of canine, and distal-buccal and palatal PDL of cervix of lateral incisor. With increasing loading, the magnitude and range of the stress was increased. Minimum principal stress: at the initial of loading, minimum principal stress which was tonsil stress, distributed in distal-interproximal PDL of cervix of lateral incisor and mesial-interproximal PDL of cervix of canine. With increasing loading, the magnitude and range of the stress was increased.von Mises stress: von Mises stress distributed in palatal and interproximal PDL of cervix of canine. With increasing loading, the magnitude and range of stress was increased. Finally, von Mises stress distributing area appeared at distal-palatal PDL of cervix of canine. (3) palatal-buccal combined sliding mechanics: maximum principal stress: maximum principal stress still distributed in distal-palatal PDL of cervix of canine. Minimum principal stress: minimum principal stress distributed in palatal PDL of cervix of lateral incisor when buccal force was more than palatal force. As palatal force increased, the stress concentrating area transferred to mesial PDL of cervix of canine.von Mises stress: it was lower and more well-distributed in palatal-buccal combined sliding mechanics than palatal or buccal sliding mechanics.CONCLUSION:Using buccal sliding mechanics,stress majorly distributed in PDL of lateral incisor and canine, and magnitude and range of stress increased with the increase of loading; Using palatal sliding mechanics, stress majorly distributed in PDL of canine, and magnitude and range of stress increased with the increase of loading; With palatal-buccal combined sliding mechanics, the maximum principal stress distributed in the distal PDL of canine. Minimum principal stress distributed in palatal PDL of cervix of lateral incisor when buccal force was more than palatal force. As palatal force was increasing, the minimum principal stress distributing area shifted to mesial PDL of cervix of canine. When using 1.00 N buccal force and 0.50 N palatal force, the von Mises stress distributed uniformly in PDL and minimal stress appeared.

Finite element analysis on stress distribution of mandibular alveolar mucosa under linear occlusal complete denture

Stress area of the mandibular alveolar mucosa under complete denture with linear occlusion at lateral excursion.

The effect of dental restoration geometry and material properties on biomechanical behaviour of a treated molar tooth: A 3D finite element analysis

The Three-Dimensional Finite Element Analysis on the Mandibular First Molar under Static and Impact Loads

Influence of anisotropy on peri-implant stress and strain in complete mandible model from CT.

Three-dimensional finite element analysis of unilateral mastication in malocclusion cases using cone-beam computed tomography and a motion capture system

[Stress Change of Periodontal Ligament of the Anterior Teeth at the Stage of Space Closure in Lingual Appliances: a 3-Dimensional Finite Element Analysis].

Stress Distribution of Periodontal Ligament in Mandibular Second Molar with Different Distal Alveolar Bone Losses

[Finite Element Analysis of First Maxillary Molars Restored with Different Post and Core Materials].

Finite Element Analysis of Fracture Resistance of Mandibular Molars with Different Access Cavity Designs

[Stress Distribution in Alveolar Bone Around Implants under Implant Supported Overdenture with Linear Occlusion at Lateral Occlusion].

Three-dimensional Finite Element Analysis of Influence of Occlusal Surface Height on Stress Distribution Around Posterior Implant-Supported Single Crown

Tooth movement tendency of space closure by sliding mechanics in customized lingual appliance: A 3-dimensional finite element analysis

Stress distribution of endodontically treated maxillary premolars restored with different cusp coverage design

Differences in root stress and strain distribution in buccal and lingual orthodontics: A finite element analysis study

Development of a biomechanical model for dynamic occlusal stress analysis

Stress Distribution in 5-Unit Fixed Partial Dentures with a Pier Abutment and Rigid and Nonrigid Connectors with Two Different Occlusal Schemes: A Three-Dimensional Finite Element Analysis

A three-dinensional finite element analysis of the rate of energy transferring of the mucosa of different thickness of edentulous mandible

Three-dimensional finite element stress analysis of the dentate human mandible.

[Three-Dimensional Finite Element Initial Analysis on the Structure Defect Restoration of Mandibular First Molar under Static and Impact Loads].

Occlusal Loading Effect on Stress Distribution of Endodontically Treated Teeth: Finite Element Analysis Study