Abstract:An integrated curing simulation methodology considering resin flow and compaction. Computational methods provide effective tools for the prediction of the curing behavior of composites, especially for large‐scale complex composite structures. The flow‐compaction analysis during curing receives insufficient attention in current studies. In this work, an integrated framework considering the heat transfer, the cross‐linking reaction, the flow and compaction, and the stress–strain module is established. A comprehensive resin flow termination criterion is proposed. L‐shaped composites with a stacking layer of [45/90/−45/0]s were fabricated, and the good agreement between the experimentally measured and the numerically predicted contour data validated the current model. Compared with Hubert's model, the prediction accuracy of the thickness and fiber volume content increases by 4.24% and 3.92%, respectively. Correlation analysis between the fiber volume ratio predicted by numerical methods and experimental results (94% for this method, −41% for Hubert's model) demonstrates the well‐capture of nonuniform fiber distribution in curved composites for the current strategy. The overall framework provides an accurate and promising tool for the prediction of the curing behavior of complex composite components. Highlights An integrated numerical methodology is proposed considering the resin flow and compaction. The viscosity‐temperature coupled feature of resin is considered in the permeability coefficients. A comprehensive resin flow termination criterion is proposed for an accurate prediction. The resin content, thickness, and spring‐in angle of L‐shaped laminates are characterized. The good correlation between the experimental and numerical results validates this method. Compared with the model proposed by Hubert, the prediction accuracy improves.

Numerical Simulation of Flow and Compaction During the Cure of Laminated Composites

Numerical simulation on resin flow of laminated composites in hot pressing process

Compaction of Laminated Composites: Numerical Simulation and Analysis on Influencing Factors

Modeling and experimental validation of compaction pressure distribution for automated fiber placement

Numerical Simulation on Consolidation and Deformation of L-shaped Composite Laminate in Autoclave Process

Simulation of Fiber Reinforced Composite Materials Mold Filling Process and Mechanical Properties Analysis

Viscosity‐coupled curing simulation model for L‐shaped composites considering flow and compaction

Modeling and Simulation of Fiber Reinforced Polymer Mold Filling Process by Level Set Method

Numerical simulation for hot diaphragm forming process of thermosetting resin matrix composites

Consolidation Simulation of Composite Laminates: Formulation and Validation Verification

Finite Element Modeling of Consolidation of Composite Laminates

Numerical Simulation of Composite Material Light-Curing Process Based on the Finite Element Analysis Method

Finite Element Analysis for Curing Process of Composite Laminates

Consolidation and Cure Simulations for Laminated Composites

Numerical investigation of the effect of thermal gradients on curing performance of autoclaved laminates

An Improved Analytical Solution For Process-Induced Residual Stresses And Deformations In Flat Composite Laminates Considering Thermo-Viscoelastic Effects

Numerical Simulation and Experimental Study on Consolidation of Toughened Epoxy Resin Composite Laminates

Finite Element Modeling of Curing of Epoxy Matrix Composites

A Model on the Curved Shapes of Unsymmetric Laminates Including Tool-Part Interaction

Numerical and Experimental Study of the Bleeder Flow in Autoclave Process

Numerical simulation of prepreg resin impregnation effect in vacuum-assisted resin infusion/prepreg co-curing process