Abstract:This paper examines the vibration and force properties of an actuator formed from a piezoelectric stack within a frame structure. Such configuration avoids the use of the traditional "earth-connected" support and allows the convenient attachment of the actuator to structures, such as power transformer tanks. The steady-state sensitivity of the actuator is analyzed, which comprised a linear frequency response function of the actuator system and a steady-state line frequency spectra of the transducer force at the frequency of the input voltage and its odd harmonics. The sensitivity is first analyzed by examining the forces transmitted to a rigid base structure through the stack and two legs of the frame when the actuator is excited by a single-frequency voltage input. The magnitude of the steady-state sensitivity at the frequency of the input voltage is approximately 15 dB higher than that at the other frequencies. The force transmitted through the piezoelectric stack is approximately twice as large as that through the two frame legs and with opposite phase. Next, the properties of transmitted forces when the rigid base structure is replaced by a beam and a plate of infinite size are also investigated. The interaction between the actuator and the elastic base structure has little effect on the magnitudes of the transmitted forces except at the resonace frequency of the actuator structure. However, the induced structural response is greatly affected and should be considered when describing the excitation capacity of the actuator. This capacity could be illustrated by the power flow between the actuator and the base structure and by the spatial distribution of the structural vibration induced by the actuator.

Analysis and Experiment Study of the Resonant Piezoelectric Actuator

A Compact Piezoelectric Stack Actuator and Its Simulation in Vibration Control

Piezomechanics Characteristics Study of Piezoelectric Stack Actuator

Experimental Research on Electro-mechanical Characterization of Piezoelectric Stack Actuator

Research on Technique and Application of Piezoelectric Stack Actuator

Nonlinear dynamic modeling and experiment of stack-type piezoelectric actuator based on system similarity method

Coupling Modal Analysis about Stack-type Piezoelectric Actuator

Dynamic Model and Parameters Identification of Piezoelectric Stack Actuators

Thermo-electro-mechanical Synergistic Effect on the Actuation Performance of Piezoelectric Stack

Design and Experimental Evaluation of a Novel Stepping Linear Piezoelectric Actuator

Modeling and simulation of a new piezoelectric stack actuator with bi-direction outputs

Study and Simulation of Active Vibration Isolation System with Piezo Electric Stack Actuators

Vibration and force properties of an actuator formed from a piezoelectric stack within a frame structure

Investigation on Driving Characteristics of a Piezoelectric Stick–slip Actuator Based on Resonant/off-Resonant Hybrid Excitation

Study on Application of Two New Types of Piezoelectric Actuators to the Vibration Control

Structural Design and Experimental Research of a Novel Piezoelectric Actuator

Influence of Electro-Mechanical Loading on Mechanical Characterization of Piezoelectric Stack Actuator

Mechanical Properties of Piezoelectric Stack Actuators under Electro-Mechanical Loading

Layered thermal effects dynamic characteristics modeling and application in piezoelectric stack actuator

Design, simulation, and motion characteristics of a novel impact piezoelectric actuator using double statorsstators

Research on the Influence of Stiffness on Piezoelectric Actuator