Abstract:When analyzing the propagation process of upward leader,many numerical models take the influence of DC operation voltage(DCOV) into consideration to some extent;however,this consideration is mainly based on the breakdown voltage of rod-conductor gap or theories of thermodynamics and electromagnetism,and lacks direct evidences from actual experiments.Thus,we investigated the influence of DCOV on the initiation and propagation characteristics of upward leader from transmission lines through experiments carried out at the Ultra High Voltage laboratory in Kunming,China.In order to simulate the circumstance for the initiation and propagation of upward leader,a 7 m long air gap which combined plane-rod(PR) electrode with conductor was used.A negative 200/2 000 μs impulse voltage up to 4 MV and a positive DC voltage up to 800 kV was applied to the electrode and the conductor,respectively.The whole process of upward leader progressing was observed using a high speed camera that had a photographing speed up to 1 000 000 frame/s;meanwhile,a current measuring instrument with its frequency response of 0~6.5 MHz was developed and used to measure the current of leader.According to results of several hundred times of experiments,compared with the conductor in the absence of voltage,the upward leader incepted about 21 μs earlier and propagated about 0.3 cm/μs faster when 500 kV positive DCOV was applied.The results reveal that positive DCOV is favorable for upward leaders propagating in negative lightning circumstance.Furthermore,the shielding failure process was simulated and tested,and the earlier inception time and faster velocity of upward leader from conductor with DCOV could be found compared with those of the upward leader from ground wire.The results suggest that the striking distance of conductor will increase when a voltage with the opposite polarity of lightning is applied to,leading to easier occurrence of the lightning attachment to transmission conductors and increase in the possibility of shielding failure.

Influence of Conductor Voltage on the Striking Distance of Electrogeometric Model

Application of EGM in Lightning Protection Design of Transmission Line with Ultra-high Tower and Great Span

Approaching to Rotated Lightning Strike on Transmission Line

Improve the electrogeometric model by the analysis results of leader propagation model for transmission lines

Improved Electrogeometric Model of UHV Transmission Line Based on Long Gap Discharge and Its Application

Calculation of Surface Electric Field on Uhv Transmission Lines under Lightning Stroke

Electromagnetic model of lightning shielding failure of transmission line

Significant Parameters Affecting a Lightning Stroke to a Horizontal Conductor

Simulated Calculation and Analysis of Lightning Performance of UHV A.C. Transmission Line

Influence of DC Operation Voltage on the Initiation and Propagation Characteristics of Upward Leader from Transmission Lines under Lightning

Lightning Performance of Quadruple-circuit Transmission Line with Dual Voltage 500/220 Kv on the Same Tower

Study on the Influence of the DC Voltage on the Upward Leader Emerging from a Transmission Line

Research on characteristics of conductor surface electric field considering downward lightning leader

Analysis of Shielding Failure Parameters of High Voltage Direct Current Transmission Lines

The effect of ground altitude on lightning striking distance based on a bi-directional leader model

Comparison of Numerical Analysis Models for Shielding Failure of Transmission Lines

Influence of Grounding Impedance Model on Lightning Protection Analysis of Transmission System

Analysis On Lightning Current And Position During Shielding Failure Of High Voltage Ac Transmission Lines

Study of Lightning Stroke to Grounded and Free Horizontal Conductor

Lightning Performance of the Dinghai- Ningbo East Extra-large Span Transmission Line

Analysis of AC and DC Flat Transmission Lines Lightning Shielding Failure