Abstract:The vertical and horizontal bending of micro-beams subjected to axial compressive and transverse concentrated loadings is a common lateral deformation in micro-/nano-engineering that plays a significant role in the design and optimization of micro-/nano-devices. The present study aims to investigate it using the nonlocal theory. For this purpose, the simplified mathematical model is developed, and the nonlocal differential constitutive equation is applied. Since the mechanical properties of micro-beams are different from those of macro-beams, the non-classical nonlocal bending moment is introduced to improve the classical bending formulation in order to adapt to the vertical and horizontal bending of micro-beams. The effects of the external load, external size, structural stiffness, and internal characteristic scale on the vertical and horizontal bending deformation including the midpoint deflection and critical compression are presented. The present analytical model and results are validated by the finite element method. It is shown that the critical compression decreases with increasing the internal characteristic scale. Moreover, the midpoint deflection varies remarkably with respect to the axial and transverse loadings, structural stiffness, internal characteristic scale, and external size. An obvious nonlocal scale effect is found, in which the internal characteristic scale cannot be neglected compared with the external size. Besides, a threshold value of the structural stiffness is determined, and the connotation of the nonlocal interaction requires that the structural stiffness shall not be lower than that threshold. A mutual restriction between structural stiffness and external loadings is observed in the vertical and horizontal bending. In particular, it is further proved that the classical continuum mechanics can not be used in micro-/nano-scaled mechanics through a strange phenomenon that is contrary to mechanical common sense in the calculation example. The study is expected to be beneficial to the design and application of micro-beams subjected to the vertical and horizontal bending.

Nonlocal shear deformable shell model for bending buckling of microtubules embedded in an elastic medium

Effect of small length scale on elastic buckling of multi-walled carbon nanotubes under radial pressure

Influence of temperature change on column buckling of multiwalled carbon nanotubes

Investigation of buckling of double-walled carbon nanotubes embedded in an elastic medium using the energy method

Bending Deformable Tension-Shear Model for Nacre-Like Composites

Dynamic shell buckling behavior of multi-walled carbon nanotubes embedded in an elastic medium

A nonlocal strain gradient shell model with surface effect for buckling analysis of magneto-electro-thermo-elastic cylindrical nanoshell subjected to axial load

Anomalous flexural behaviors of microtubules.

Local Versus Global Buckling Of Thin Films On Elastomeric Substrates

A Finite-Deformation Shell Theory for Carbon Nanotubes Based on the Interatomic Potential-Part I: Basic Theory

Nonlinear Thermal Bending for Shear Deformable Nanobeams Based on Nonlocal Elasticity Theory

The Intrinsic Stiffness of Single-Wall Carbon Nanotubes

Can a Single-Wall Carbon Nanotube Be Modeled As a Thin Shell?

Continuum Modeling of Boron Nitride Nanotubes

On Nonlocal Vertical and Horizontal Bending of a Micro-Beam

A bi-Helmholtz type of two-phase nonlocal integral model for buckling of Bernoulli-Euler beams under non-uniform temperature

Dynamic Torsional Buckling of Multi-Walled Carbon Nanotubes Embedded in an Elastic Medium

Nonlinear deformation analysis of magneto-electro-elastic nanobeams resting on elastic foundation by using nonlocal modified couple stress theory

Postbuckling behavior of CNT-reinforced composite cylindrical shell surrounded by an elastic medium and subjected to combined mechanical loads in thermal environments

Elastostatics of nonuniform miniaturized beams: Explicit solutions through a nonlocal transfer matrix formulation

A Unified Modified Couple Stress Model for Size-Dependent Free Vibrations of FG Cylindrical Microshells Based on High-Order Shear Deformation Theory