Abstract:Permanent deformation is a long-term irrecoverable depression accumulated in the wheel path when the flexible pavement is subjected to heavy loads at high temperature, which can be simulated using the vertically loaded wheel test (VLWT) in the laboratory. The objective of this study is to develop a new approach to analyze the vertically loaded wheel test results based on the elastic-viscoelastic correspondence principle. The energy-based pseudo variables are proposed to perform rutting evaluation of asphalt mixtures in the VLWT.Four types of styrene-butadienestyrene modified asphalt mixtures were prepared to conduct the undamaged compressive dynamic modulus test at different temperatures. Then the master curves of dynamic modulus for these mixtures were converted to get the relaxation modulus. The innovative VLWT for four types of two-layer structure with different asphalt mixture combinations were performed to investigate the rutting development. After that, a new mechanical-empirical rutting prediction model was introduced to predict the rutting development for each layer in the two-layer structure. The energy-based pseudo variables including pseudo strain, pseudo strain rate and dissipated pseudo strain energy (DPSE) were introduced to correlate with the rutting resistance.The results show that the developed mechanical-empirical rutting prediction model is proficient in capturing the rutting development of a two-layer structure of asphalt mixtures measured by a vertically loaded wheel tester. The rutting contributions of the top and bottom layers can be separated using this model. Compared with the total strain, the pseudo strain which removes the viscoelastic effect, is more accurate to evaluate the permanent deformation in a cyclic loading condition. The DPSE increases with the increase of loading cycles and rut depth. Two typical stages with an inflection point can be observed from the test results which indicate that the faster to reach the inflection point, the better rutting performance will be achieved.

Study of Technique for Rut Extraction of the Pavement Transverse Profile and Parameters Calculation

Evaluation of Rutting Potential of Flexible Pavement Structures Using Energy-Based Pseudo Variables

3D Rutting Features Extraction Through Continuous Pavement Laser Point Cloud

A Rut Measuring Method Based on Laser Triangulation with Single Camera

Study of Rutting Mechanism of Asphalt Pavement

Rutting Mechanism Analysis Of Heavy-Duty Asphalt Pavement Based On Pavement Survey, Finite Element Simulation, And Instrumentation

Rutting measurement in asphalt pavements

Analysis of Formation Mechanism and Main Influence Factors of Rutting of Asphalt Concrete Pavement

A Data-Driven Rutting Depth Short-Time Prediction Model with Metaheuristic Optimization for Asphalt Pavements Based on RIOHTrack

Characterization of Road Surface Topography Changes During Polishing Process with Characteristic Roughness Parameter

Study on Ground Penetrating Radar for Rutting Recognition in Asphalt Pavement

A hybrid framework for asphalt pavement rutting prediction modeling and influencing factors analysis based on multilevel wavelet decomposition and transfer entropy

Analysis of the lateral slope’s impact on the calculation of water-filled rut depth

Research on Rutting Deformation Monitoring Method Based on Intelligent Aggregate

A noise-reduction algorithm for raw 3D point cloud data of asphalt pavement surface texture

Monitoring Rutting Deformation of Asphalt Using Distributed Optical Fiber Shape Sensing Technology

Study on Calculation of IRI Based on Power Spectral Density of Pavement Surface Roughness

Study of Pavement Micro- and Macro-Texture Evolution Due to Traffic Polishing Using 3D Areal Parameters

Development of Rutting Forecasting Models for Distinct Asphalt Pavement Structures in RIOH Testing Track Using Different Approaches

Modification of MEPDG Rutting Model Based on RIOHTrack Data