Abstract:Background: The copper/low-density polyethylene composite (Cu/LDPE composite) intrauterine devices (IUDs), which can eliminate or lessen the side effects of existing IUDs, have been developed in our laboratory. As a novel type of copper-containing IUDs, it is not clear whether the mechanical properties of the Cu/LDPE composite IUDs can meet the need of clinical use or not. Therefore, the mechanical properties of the Cu/LDPE composite IUDs have been studied in the present article.Study Design: The influence of copper particle content and size on the mechanical properties of the Cu/LDPE composite IUDs was analyzed firstly to provide guidance for the material composition design of the Cu/LDPE composite IUDs, and then the BaSO4/LDPE composite, which has been applied as a framework of the existing copper-containing IUDs in clinical use for decades, has been used as reference to judge whether the mechanical properties of the Cu/LDPE composite IUDs can meet the need of clinical use or not. However, the mechanical properties of IUDs cannot be characterized directly. Therefore, the mechanical properties of both the Cu/LDPE composite IUDs and the framework of the existing copper-containing IUDs were investigated by means of tensile test using standard tensile samples, and the fracture surface morphology of the tensile samples was characterized by scanning electron microscopy (SEM).Results: Both the elongation at break and the tensile strength decrease with increasing of copper particle content and increase with increasing of the copper particle size, while the elastic modulus shows an opposite tendency. The tensile strength and elastic modulus of both the Cu/LDPE microcomposite IUDs and the Cu/LDPE nanocomposite IUDs with 25 wt.% of copper particles are higher than those of existing copper-containing IUDs (TCu220C; its framework is made of the BaSO4/LDPE composite with 20 wt.% of BaSO4).Conclusions: The content and size of the copper particles have significant effect on the mechanical properties of Cu/LDPE composite IUDs. The mechanical properties of both the Cu/LDPE microcomposite IUDs and the Cu/LDPE nanocomposite IUDs with 25 wt.% of copper particles were superior to that of existing copper-containing IUDs, indicating that the novel Cu/LDPE composite IUDs can satisfy the requirement of mechanical properties in clinical application. (C) 2011 Elsevier Inc. All rights reserved.

Effects of Ldpe Film on the Properties of Copper/Ldpe Composites for Intrauterine Contraceptive Device

Effect of the Loading and Size of Copper Particles on the Mechanical Properties of Novel Cu/Ldpe Composites for Use in Intrauterine Devices

A Porous Cu/LDPE Composite for Copper-Containing Intrauterine Contraceptive Devices.

Zn2+ Release Behavior and Surface Characteristics of Zn/LDPE Nanocomposites and ZnO/LDPE Nanocomposites in Simulated Uterine Solution

Anti-Aging Properties of the Cu/Ldpe Composite for Intrauterine Contraceptive Devices

Study on the Mechanical Properties of Cu/LDPE Composite IUDs.

Water Absorption Characteristics of Novel Cu/Ldpe Nanocomposite for Use in Intrauterine Devices

Chitosan/alginate Multilayer Film for Controlled Release of IDM on Cu/LDPE Composite Intrauterine Devices

IDM Release Behavior and Surface Characteristics of the Novel Cu/IDM/LDPE Nanocomposite for Intrauterine Device.

Indomethacin/Cu/LDPE Porous Composite for Medicated Copper Intrauterine Devices with Controlled Release Performances

Preparation and Cupric Ion Release Behavior of Cu/LDPE Porous Composites with Tunable Pore Morphology for Intrauterine Devices

Cupric ion release controlled by copper/low-density polyethylene nanocomposite in simulated uterine solution.

In vitro release of cupric ion from intrauterine devices: influence of frame, shape, copper surface area and indomethacin

The Release of Cupric Ion in Simulated Uterine: New Material Nano-Cu/low-density Polyethylene Used for Intrauterine Devices

A Novel Copper/Polydimethiylsiloxane Nanocomposite for Copper-Containing Intrauterine Contraceptive Devices

Effect of Implanted Cu/low-density Polyethylene Nanocomposite on the Morphology of Endometrium in the Mouse

Will Ethylene Oxide Sterilization Influence the Application of Novel Cu/LDPE Nanocomposite Intrauterine Devices?

Influence of Pore Morphology on the Mechanical Properties of Cu/Ldpe Porous Composites for Intrauterine Devices

Corrosion Behavior of Copper/ldpe Nanocomposites in Simulated Uterine Solution.

Electrochemical Study of the Corrosion Behaviour of Copper/Low-Density Polyethylene Microcomposite in the Simulated Uterine Solution

An Approach to Give Prospective Life-Span of the Copper/Low-Density-Polyethylene Nanocomposite Intrauterine Device