Abstract:Two kinds of activated carbons modified by Na+ impregnation after pre-treatments involving oxidation by nitric acid or acidification by hydrochloric acid (denoted as AC/N-Na and AC/HCl-Na, respectively), were used as adsorbents to remove NH+4-N. The surface features of samples were investigated by BET, SEM, XRD and FT-IR. The adsorption experiments were conducted in equilibrium and kinetic conditions. Influencing factors such as initial solution pH and initial concentration were investigated. A possible mechanism was proposed. Results showed that optimal NH+4-N removal efficiency was achieved at a neutral pH condition for the modified ACs. The Langmuir isotherm adsorption equation provided a better fit than other models for the equilibrium study. The adsorption kinetics followed both the pseudo second-order kinetics model and intra-particle kinetic model. Chemical surface analysis indicated that Na+ ions form ionic bonds with available surface functional groups created by pre-treatment, especially oxidation by nitric acid, thus increasing the removal efficiency of the modified ACs for NH+4-N. Na+-impregnated ACs had a higher removal capability in removing NH+4-N than unmodified AC, possibly resulting from higher numbers of surface functional groups and better intra-particle diffusion. The good fit of Langmuir isotherm adsorption to the data indicated the presence of monolayer NH+4-N adsorption on the active homogenous sites within the adsorbents. The applicability of pseudo second-order and intra-particle kinetic models revealed the complex nature of the adsorption mechanism. The intra-particle diffusion model revealed that the adsorption process consisted not only of surface adsorption but also intra-particle diffusion.

pH and Salt Effect on the Adsorption of 2,4-Dinitrophenol onto Activated Carbon Fiber

Effect of Ph and Salt on Adsorption of 2,4-Dinitrophenol with Activated Carbon Fiber

Adsorption Behavior of p-Nitrophenol from Water onto Activated Carbon Fiber

Kinetics of adsorption of 2,4-dichlorophenol by nitrogen doping activated carbon

Adsorption characteristics of taste and odor compounds IPMP and IBMP by powder activated carbon in aqueous system

Adsorption of P-Nitrophenol from Aqueous Solutions Onto Activated Carbon Fiber

Activated Carbon Adsorption for Removal of the Nitrogenous Disinfection Byproduct Phenylacetonitrile from Drinking Water

Mechanistic analysis of effects of pH and salt concentration on lactoferrin adsorption onto adsorbents with sulfonic ligand

Title : Effect of Na + impregnated activated carbon on the adsorption of NH 4 +-N from aqueous solution

Adsorption of p-nitrophenol from wastewater by activated carbon fiber and its desorption

Adsorption of Phenol and 2,4‐Dinitrophenol on Activated Carbon Cloth: The Influence of Sorbent Surface Acidity and pH

Removal of 2,4-Dichlorophenol from Aqueous Solution by Static-Air-activated Carbon Fibers

EFFECT OF SALT ON ADSORPTION MECHANISM OF PHENOL ONTO A HYPER-CROSS-LINKED ADSORBENT

Analysis of adsorption characteristics of 2,4-dichlorophenol from aqueous solutions by activated carbon fiber.

Adsorption of P-Nitroaniline from Aqueous Solutions Onto Activated Carbon Fiber Prepared from Cotton Stalk.

Adsorption of 2,4-Dichlorophenol from Aqueous Solution Onto Microwave Modified Activated Carbon: Kinetics and Equilibrium

Adsorption of 2,4-Dinitrophenol and 2,4-Dichlorophenol on Cationic Surfactant Modified Red Soil

Study On The Adsorption Of Dyes Using Diatomite And Activated Carbon

The Salt Effect and Its Mechanism of Adsorbing the Organism in Water by Organobentonite

Sorption of Aqueous 3,4-dichloroaniline by Activated Carbon Fiber

Adsorption Behavior and Influence Factors of P-Nitroaniline on High Surface Area Activated Carbons Prepared from Plant Stems