Abstract:In order to detect weak magnetic field, the demonstration based on all-fiber full polarization Sagnac magnetic sensor was used in our scheme. Beam condense system(BCS) is very meaningful as one of the key technologies in this magnetic sensor. In the paper, we introduce a simple way to design a BCS. Because of the restriction of the system space, the BCS can’t take too much space. However, the common product of beam condense system is kind of complex and will take much space, these disadvantages can’t meet the application. We choose small lenses, design the simple workpiece by ourselves and coupling into our detection system. The workpiece including pressure rings and sleeves. In our plan, we choose telescope system as optical path. After passing the beam condense system, the diameter of beam can be smaller and reflect in magnetic-optical crystal (MOC) many times. In this way, the sensitivity of detection system can be magnified for about 11 times. Overall, the most obvious advantages of this beam condense system are simple structure, small space and low cost. There are two important parameters of beam condense system: The first is called condense ratio, which can be controlled by the choice of lenses. The second is called final beam diffusion angle, which depended on both the condense ratio and beam diffusion angle of collimating lens.

Design of Transducer in Fiber-Optic Interferometric Magnetometers for Measarement of Low-Intensity Magnetic Fields

Design of a Beam Condense System with Simple Structure

A Novel Special Optical Fiber with Magneto-Optic Nonreciprocal Phase Shift under Transversely Applied Magnetic Field

Experimental Study of Some Key Issues on Fiber-Optic Interferometric Sensors Detecting Weak Magnetic Field

A Novel Configuration for the Transducer of Magneto Strictive Fiber-Optic Interferometric Sensors

Several Considerations In Design Of Practical Fiber Optical Magnetometer

High-sensitivity and Low-Temperature Magnetic Field Sensor Based on Tapered Two-Mode Fiber Interference

Experimental Investigation on Temperature Dependence of the Performance in a Magnetostrictive Fiber-Optic Interferometric Magnetic Field Sensor

Magnetic Sensor Based on Serial-Tilted-tapered Optical Fiber for Weak-Magnetic-field Measurement.

Three-Dimensional Magnetic Field Vector Measurement Using Fiber Mounted Magneto-Optic Probe

Fiber Optic All-Polarization Weak Magnetic Field Sensor Based on Sagnac Interferometer

An Intensity-Demodulated Fiber-Optic Magnetometer Based on Nanostructured Magnetic Fluid-Filled Fluidic Photonic Crystal Fibers

Magnetic Sensing Technology of Fiber Optic Interferometer Based on Magnetic Fluid: A Review

A New Magnetic Sensor with Mach-Zehnder/Sagnac Optical Fiber Interferometer

Magnet circuit design and optimization of giant magnetostrictive transducer

In-Line Michelson Interferometer Based on Optical Fiber Microspherical Structure for Magnetic Field Application

Analysis of Non-Uniform Magnetic Field Error and Optimization Design for Fiber Optic Ultra-High Current Transformer

Characterization of Fiber-Optic Vector Magnetic Field Sensors Based on the Magneto-Strictive Effect

Interferometric Optical Microfiber Magnetic Field Sensor Based on Magnetostrictive Rod

Magnetic Field Sensor Based on Asymmetric Optical Fiber Taper and Magnetic Fluid

Design of Interferometric Fiber-Optic Weak DC Electric-Field Sensor