Abstract:In this study, the traditional membrane fouling control method was replaced with online ultrasonic technology, and the mechanism of ultrasonic‐enhanced ceramic MBRs membrane fouling control was preliminarily revealed. This experiment provides theoretical foundations and technical support for the practical application of ultrasonic in ceramic MBRs membrane fouling control. In recent years, ceramic membranes have been increasingly used in membrane bioreactors (MBRs). However, membrane fouling was still the core issue restricting the large‐scale engineering application of ceramic MBRs. As a novel and alternative technology, ultrasonic could be used to control membrane fouling. This research focused on the efficiency and mechanism of ultrasonic controlling membrane fouling in ceramic MBRs. The results showed that ultrasonic reduced the sludge concentration in MBR, and the average particle size of sludge was always in a high range. The sludge activity of the system was stable at 6–9 (mg O2·(g MLSS·h)−1), indicating that ultrasonic did not destroy the activity of microorganisms in the system. The extracellular polymer substance (EPS) of the ultrasonic group was slightly higher than that of the control group, while the soluble microbial product (SMP) content was relatively stable. The ceramic membrane of the ultrasonic group has a partial retention effect on the organic components. The application of ultrasonic slowed down the decrease of the hydrophilicity of the ceramic membrane. The main pollutants on the membrane surface exist in the form of aromatic and heteroaromatic rings, alkynes, and so forth. Ultrasonic removes the amide substances from the membrane surface. Membrane fouling resistance is mainly due to membrane pore blockage, accounting for 75.53%. Practitioner Points Enrich the research on the mechanism of ultrasonic technology in membrane fouling control. The MBR can still operate normally with ultrasonic applied. The time for the ceramic membrane to reach the fouling end point is 2.4 times that without ultrasonic. The main cause of membrane fouling was pore blocking, accounting for 75.53%.

Effect of on-line ultrasound on the properties of activated sludge mixed liquor in a membrane bioreactor

On-line Ultrasound on Fouling Control of Membrane Bioreactor

Effects of Online Ultrasonic Cleaning on Fouling Control and Mixed Liquor Properties in Membrane Bioreactor

Mechanisms of membrane fouling controlled by online ultrasound in an anaerobic membrane bioreactor for digestion of waste activated sludge

[Membrane Fouling Control in a Free-End Comb-Like Hollow Fiber Membrane Bioreactor].

Feasibility of employing ultrasound for on-line membrane fouling control in an anaerobic membrane bioreactor

An A/O submerged membrane bioreactor and its membrane fouling research in treating bathing wastewater

A Hybrid Anaerobic Membrane Bioreactor Coupled with Online Ultrasonic Equipment for Digestion of Waste Activated Sludge

Influences of Sludge Retention Time on Sludge Properties and Membrane Fouling of Submerged Membrane Bioreactor with the Addition of Ca2+

Study on the membrane fouling control by ultrasound in anaerobic membrane bioreactor

Membrane fouling control by ultrasound in an anaerobic membrane bioreactor

Characteristics of extracellular polymeric substances and bacterial communities in an anaerobic membrane bioreactor coupled with online ultrasound equipment.

Exerting Ultrasound To Control The Membrane Fouling In Filtration Of Anaerobic Activated Sludge - Mechanism And Membrane Damage

Study on efficiency and mechanism of ultrasonic controlling membrane fouling in ceramic membrane bioreactors

Improvement of Membrane Filterability of the Mixed Liquor in a Membrane Bioreactor by Ozonation

Research progress on effect of mixed liquor characteristics on membrane fouling in membrane reactors

Effect of Biopolymer Clusters on the Fouling Property of Sludge from a Membrane Bioreactor (MBR) and Its Control by Ozonation

Study on change of sludge mixed liquor characteristics and membrane fouling in MBR

A comparison study on membrane fouling in A/O-MBR and A/A-MBR at different mixed liquor-suspended solids concentrations

Superior performance of a membrane bioreactor through innovative in-situ aeration and structural optimization using computational fluid dynamics

Simultaneous sludge minimization and membrane fouling mitigation in membrane bioreactors by using a microaerobic - Settling pretreatment module