Abstract:In the actual industrial production process, the method of adaptively tuning proportional–integral–derivative (PID) parameters online by neural network can adapt to different characteristics of different controlled objects better than the controller with PID. However, the commonly used microcontroller unit (MCU) cannot meet the application scenarios of real time and high reliability. Therefore, in this paper, a closed-loop motion control system based on BP neural network (BPNN) PID controller by using a Xilinx field programmable gate array (FPGA) solution is proposed. In the design of the controller, it is divided into several sub-modules according to the modular design idea. The forward propagation module is used to complete the forward propagation operation from the input layer to the output layer. The PID module implements the mapping of PID arithmetic to register transfer level (RTL) and is responsible for completing the output of control amount. The main state machine module generates enable signals that control the sequential execution of each sub-module. The error backpropagation and weight update module completes the update of the weights of each layer of the network. The peripheral modules of the control system are divided into two main parts. The speed measurement module completes the acquisition of the output pulse signal of the encoder and the measurement of the motor speed. The pulse width modulation (PWM) signal generation module generates PWM waves with different duty cycles to control the rotation speed of the motor. A co-simulation of Modelsim and Simulink is used to simulate and verify the system, and a test analysis is also performed on the development platform. The results show that the proposed system can realize the self-tuning of PID control parameters, and also has the characteristics of reliable performance, high real-time performance, and strong anti-interference. Compared with MCU, the convergence speed is far more than three orders of magnitude, which proves its superiority.

Research on An Integrated Stepping Motor Controller Based on FPGA

Design of LED Production Equipment Molding Motion Controller Base on FPGA

The Design of BLDC Motor Control System Based on FPGA

The Modelling, Simulation and FPGA-Based Implementation for Stepper Motor Wide Range Speed Closed-Loop Drive System Design

Design of Stepper Motor Subdivision Control System Based on ARM

Design and Implementation of Speed Closed-loop Control of Brushless DC Motor Based on FPGA

The Application of FPGA in BLDC Motor Control System

A Design of Controller for Brushless DC Motor Based on Fusion FPGA

Study on Automatic Position Setting System of Stepping Motor Based on Fuzzy PID Control

Proposal of a reliable embedded circuit to control a stepper motor using microblaze soft-core processor

Development and Implementation of Modular FPGA for a Multi-Motor Drive and Control Integrated System

Research on Design Method and Application of FPGA-Based Motion Control

Variable Frequency Driver System of Asynchronous Motor Based on FPGA

An SoC-based Platform for Integrated Multi-Axis Motion Control and Motor Drive

An open-loop sin microstepping driver based on FPGA and the co-simulation of modelsim and simulink

Research on Fully Integrated Digital Control Power Management Chip System Based on FPGA.

A Design of FPGA-Based Neural Network PID Controller for Motion Control System

Fuzzy Neural Network Applied in Sensorless BLDC Motor Control Based on MC56F8013

DC Motor Control Using Pulse-Width Modulation Based on FPGA

Design of FPGA-based Drive-control System for Partial Hand

Model Predictive Controller Design and Implementation on FPGA with Application to Motor Servo System