Abstract:A general two-dimensional (2D) theoretical approach capable of providing an explicit closed-form solution is developed for the calculation of elastic stresses in single-lap adhesive bonded joints, assuming linear distribution of a longitudinal normal stress in the joint thickness direction. By treating the adhesive layer in the same way as the adherends, the two-dimensional stress and strain distributions at any point, and the tensile force, shearing and bending moment at any cross section can be predicted accurately, in both the adhesive and adherends. This makes it possible for the subsequent failure analysis of the bonded joints to predict all the main modes such as adherend failure, cohesive failure and adhesive failure. The analysis is based on a two-dimensional elasticity theory that both includes the complete stress-strain and the complete strain-displacement relationships for the adhesive and adherends. Then, through the use of the displacement continuity conditions at the interfaces between the adhesive and adherends, four coupled, fifth-order ordinary differential equations with constant coefficients for the determination of the stresses are developed. The proposed method is capable of satisfying all the boundary stress conditions of the joint, including the stress-free surface condition at the ends of the bondline. The calibration of the new theoretical approach was verified by comparing it with the previously theoretical solutions, and the 2D geometrically nonlinear finite element models with the rotation and non-rotation boundary conditions. It is indicated that the present solution can provide a good prediction for the stress and strain distributions in the adhesive and adherends. A different approach is also established for determining bending moment factor of the short joints wherein the consideration of overall joint moment equilibrium is emphasized. It was shown that when the proposed bending moment factor is adopted instead of the original one, the classical solution by Goland and Reissner (1944) [4] might still remain applicable to the adherends and adhesive even with the parameter E3t1/(E1t3) 0.1.

Optimal Shapes for Adhesive Binding Between Two Elastic Bodies

Size and Shape Dependent Steady-State Pull-off Force in Molecular Adhesion Between Soft Elastic Materials

Orientation-dependent Adhesion Strength of a Rigid Cylinder in Non-Slipping Contact with a Transversely Isotropic Half-Space

Mechanics of adhesive contact on a power-law graded elastic half-space

Adhesive Contact of Elastic Solids with Self-Affine Fractal Rough Surfaces

Elastic Stress Analysis of Single-Lap Adhesive-Bonded Joints

Specific Adhesion of a Soft Elastic Body on a Wavy Surface

Using the Dugdale Approximation to Match A Specific Interaction in the Adhesive Contact of Elastic Objects

Adhesion in soft contacts is minimum beyond a critical shear displacement

Adhesive Contact of Flat-Ended Wedges: Theory and Computer Experiments

Ellipticity enhances adhesion strength for contacts under shear loads

Interface Stress Uniformity Design of Elastomer Adhesives

Optimal load sharing in bioinspired fibrillar adhesives: Asymptotic solution

Mechanics of Molecular Bond Clusters Between Elastic Media: Stochastic-Elastic Coupling in Cell-Matrix Adhesion

On Adhesion Enhancement Due to Concave Surface Geometries

A Two-Dimensional Approach of Single-Lap Adhesive Bonded Joints

Directional Adhesion Behavior of A Single Elastic Fiber

Finite Element Modeling of the Nano-scale Adhesive Contact and the Geometry-based Pull-off Force

Non-Slipping Adhesive Contact Between Dissimilar Elastic Solids under Normal and Tangential Loads

Bio-Inspired Mechanics of Reversible Adhesion: Orientation-Dependent Adhesion Strength for Non-Slipping Adhesive Contact with Transversely Isotropic Elastic Materials

Closed-form solutions for elastic stressstrain analysis in unbalanced adhesive single-lap joints considering adherend deformations and bond thickness