Concentration Mechanism of Ore-Forming Fluid in Huize Lead-Zinc Deposits, Yunnan Province

ZHANG Zhen-liang,HUANG Zhi-long,RAO Bing,GUAN Tao,YAN Zai-fei
DOI: https://doi.org/10.3321/j.issn:1000-2383.2005.04.007
2005-01-01
Earth Science-Journal of China University of Geosciences
Abstract:The Huize Pb-Zn ore deposits, Yunnan Province, located in the southern-center of the Sichuan-Yunnan-Guizhou Pb-Zn-Ag multimetal mineralization district, are strictly controlled by faulted zones. There has long been controversy about the sources of ore-forming fluid in these ore deposits. Calcite is one of the gangue minerals in the ores of these ore deposits. Their δ 13C(PDB) values vary from -2.1×10 -3 to -3.5×10 -3, and their δ 18O(SMOW) values are 16.7×10 -3 to 18.6×10 -3. There are no obvious difference in the δ 13C(PDB) values and the δ 18O(SMOW) values of calcites from different orebodies, different occurrences and different elevations. Besides pure liquid inclusions (L) and gas-liquid inclusions with rich liquid (L+V), three-phase inclusions containing a daughter (S+L+V) and immiscible three-phase CO_2 inclusions (V_ CO_2+L_ CO_2+L_ H_2O) occur in the minerals. The homogenization temperatures of all these inclusions vary from 110℃ to 400℃, and have two peaks. ( 87Sr/ 86Sr)_0 ratios of these ore deposits (0.713676-0.717012) are obviously higher than those of the mantle (0.704±0.002) and Emeishan basalt (0.703932-0.707818; 85 samples), and slightly higher than those of the Baizuo Formation of Huize lead-zinc ore deposits (0.70868-0.70931; 3 samples). But all these ratios are lower than the ones of the basement rocks (0.7243-0.7288; 5 samples). The ( 87Sr/ 86Sr)_0 ratios of these ore deposits also show that the isotopic fractionation of Sr does not occur in the ore-forming fluid during the precipitation of minerals. So, the ore-forming fluid is homogeneous and a product of different fluid mixing.Gas-liquid inclusions can be obviously separated into two groups in the range of 300-400℃ according to their salinities: a group with the salinity of 5%-6% (w(NaCl)) and the other group with the salinity of 12%-16% (w(NaCl)). However, the salinities of inclusions vary from 7% to 23% (w(NaCl)) in the range of 100-300℃, especially the range of 150-250℃. The pressures of faulted zones are 50×105-320×105Pa and the pressures of overlying rocks on the ore bodies are 574×105-640×105Pa, and those of the ore-forming processes vary from 145×105 to 754×105Pa. When the ore-forming fluid flows into the faulted zones, its pressure sharply reduces. Then boiling occurs in the ore-forming processes. As a result of fluids mixing and boiling, the ore-forming fluid is highly concentrated. When the fluid is saturated or oversaturated, metallic minerals begin to precipitate on a great scale. So, the grade of lead-zinc ores is very high.
What problem does this paper attempt to address?