Abstract:Ultrasound-induced cavitation in blood vessels is a common scenario in medical procedures. This paper focuses on understanding the mechanism of microscopic damage to vessel walls caused by the evolution of cavitation bubbles within the vessels. In this study, cavitation bubbles were generated using the low-voltage discharge method in 0.9% sodium chloride saline, and vessel models with wall thicknesses ranging from 0.7 mm to 2 mm were made using a 3D laminating process. The interaction between cavitation bubbles and vessel models with different wall thicknesses was observed using a combination of high-speed photography. Results show that cavitation bubble morphology and collapse time increased and then stabilized as the vessel wall thickness increased. When the cavitation bubble was located in vessel axial line, pair of opposing micro-jets were formed along the axis of the vessel, and the peak of micro-jet velocity decreased with increasing wall thickness. However, when the cavitation bubble deviated from the vessel model center, no micro-jet towards the vessel model wall was observed. Further analysis of the vessel wall deformation under varying distances from the cavitation bubble to the vessel wall revealed that the magnitude of vessel wall stretch due to the cavitation bubble expansion was greater than that of the contraction. A comparative analysis of the interaction of between the cavitation bubble and different forms of elastic membranes showed that the oscillation period of the cavitation bubble under the influence of elastic vessel model was lower than the elastic membrane. Furthermore, the degree of deformation of elastic vessel models under the expansion of the cavitation bubble was smaller than that of elastic membranes, whereas the degree of deformation of elastic vessel models in the contraction phase of the cavitation bubble was larger than that of elastic membranes. These new findings provide important theoretical insights into the microscopic mechanisms of blood vessel potential damage caused by ultrasound-induced cavitation bubble, as well as cavitation in pipelines in hydrodynamic systems.

Displacement Wave of the Blood Vessel —A Mechanical Model

[Three-Dimensional Motion Analysis of Right Ventricular Based on an Electrophysiologic-Mechanical Composite Heart Model].

Simulation of Blood Pressure Wave Propagation in A Vessel by One-Dimensional Model

A Study on Modified Szabo's Wave Equation Modeling of Frequency-Dependent Dissipation in Ultrasonic Medical Imaging

A New Model of Ultrasonic Guided Wave Propagation in Blood Vessels and Its Propagation Characteristics

Mechanobiological Tortuosity of Blood Vessels with Stress-Modulated Growth and Remodeling

Blood pressure-driven rupture of blood vessels

A Comparison of Constitutive Models of Blood

Experimental study on damage mechanism of blood vessel by cavitation bubbles

Nonlinear Waves Propagating in an Inhomogeneous Blood Vessel

Simulating Doppler ultrasound blood flow signals with the pulsation of the vascular wall

Well-posedness, ill-posedness, and traveling waves for models of pulsatile flow in viscoelastic vessels

Viscous flow past a collapsible channel as a model for self-excited oscillation of blood vessels.

Fluid friction and wall viscosity of the 1D blood flow model

Multiscale Modeling of Vascular Remodeling Induced by Wall Shear Stress

A multi-dimensional model for describing internal bleeding detection in artery by Doppler ultrasound

The Simulation of Benign Tumor Growth in Blood Vessels Circumstance

Numerical simulation of two-phase non-Newtonian blood flow with fluid-structure interaction in aortic dissection

Research on the Flow Field Distribution of Non-Circular Cross-Section Vessels Based on the Schwarz-Christoffel Transformation

A Prediction of in Vivo Mechanical Stresses in Blood Vessels Using Thermal Expansion Method and Its Application to Hypertension and Vascular Stenosis

Investigation of pulsatile flowfield in healthy thoracic aorta models