Abstract:A new method to extract extrinsic base resistance and collector resistance is presented using cutoff mode measurement and open/short test structure without reference to numerical optimization. Good agreement is obtained between measured and modeled results for a 5x5 um2 InP HBT. I. INTRODUCTION Accurate extraction of small signal equivalent circuit of HBT is important for optimizing device performance. The numerical optimization can vary depending upon the optimization method and the starting values, and may result in nonphysical and non-unique values of the circuit elements. The analytical approach in HBT equivalent circuit parameter extraction has been addressed. Most of the direct extraction methods are based on certain assumptions and approximations (1-8). Due to the diversity of the process technology, device design, and geometry, these assumptions and approximations need to be modified and adjusted. In order to overcome these difficulties, an improved method for determining the InP HBT extrinsic elements is proposed in this paper. This method is a combination of the test structure and direct extraction methods. First, the PAD capacitances and series wire inductances can be extracted using normal open, short test structures, then the extrinsic resistances Rbx and Rc are obtained using cutoff mode S-parameter measurements (zero VCE, zero IC, variable VCB). The advantage of this procedure is that no assumptions and approximations are needed.

An Approach for Extracting Small-Signal Equivalent Circuit of Double Heterojunction δ-Doped PHEMTs for Millimeter Wave Applications

An Approach to Linear Scalable DH-PHEMT Model for Millimeterwave Application

A Compact Gate-Width Scalable Model for Dual-Gate GaAs Phemt

A New Meshing Criterion for the Equivalent Thermal Analysis of GaAs PHEMT MMICs.

A New Method to Extract Gate Bias-Dependent Parasitic Resistances in GaAs Phemts

A Compact Model for Dual-Gate GaAs PHEMT and Application for Power Amplifier Design

Equivalent method of GaAs PHEMT MMIC for thermal simulation

A New Extraction Method of GaN Switch-Hemt Small-Signal Model with Capacitance Scanning Algorithm

A distributed small signal equivalent circuit modeling method for InP HEMT

A complete small‐signal model of GaAs dual‐gate HEMT

Parameter Extraction for HEMT Small-Signal Models Based on a Differential Evolution Algorithm

Monolithic Integration of InGaP/AlGaAs/InGaAs Enhancement/Depletion-Mode PHEMTs

Analysis of Passivation Techniques in InP HEMTs and Implementation of an Analytical Model of F(t) Based on the Small Signal Equivalent Circuit

Direct Extraction Method of HEMT Switch Small‐signal Model with Multiparasitic Capacitive Current Path

Direct parameter extraction method for InP heterojunction bipolar transistors based on the combination of <i>T</i>- and -models up to 110GHz

An Approach to Determine and for InP HBT Using Cutoff Mode Measurement

Accurate modeling and parameter extraction for MOS transistors valid up to 10 GHz

A Complete Small-Signal MOSFET Model and Parameter Extraction Technique for Millimeter Wave Applications

Extraction Method for Parasitic Capacitances and Inductances of HEMT Models

Full Geometric Simulation of Miniaturized GaN Double-Heterojunction High Electron Mobility Transistors by a Multiscale Approach Coupling Quantum and Semi-Classical Transport

A novel small-signal equivalent circuit model for GaN HEMTs incorporating a dual-field-plate