Abstract:Color is essential for the fashion and art of fabrics, with its retention being a quality measure of great significance for the brand and user. The colorfastness of some metallic fabrics has been established using absorption spectroscopy, by determining the quality and quantity of dye that bled after undergoing wash laundry processes. Two metallic fabrics (X and Y) and washing detergents (liquid and powdered) were used. The fabrics were washed using GyroWash machine set for normal (40°C) and hot (60°C) wash for durations of 60 min and 90 min. There was a repeat for a second wash. The wastewater after each wash (sample) was collected, and the absorption spectra were recorded using a double‐beam spectrophotometer. The quality of dyes drained was determined using Peakfit analysis to deconvolute the absorption spectrum to reveal the presence of multiple individual wavelengths, and quantified using their relative intensity values. The identified peaks were between 200 nm and 370 nm, which lie within the UV–Vis absorption band of synthetic dyes referred to as azo dyes. The liquid soap bled more dye under the same washing conditions, with fabric Y demonstrating an inferior ability to retain its dye compared to fabric X. A higher amount of dye was drained during the hot wash, with the amount of dye that bled from both fabrics reducing after the first wash. Euclidean similarity was performed using principal component analysis to identify the spectra close to the detergent solution (reference spectrum) in Euclidean distance sense. Points from the wastewater spectra similar to the reference had shorter absolute distances, indicating less bleeding, while more dissimilar points registered longer distance, indicating more bleeding. This absorption spectroscopy technique is scientific and objective compared to the conventional subjective gray scale method. It will help textile manufacturers develop standardized testing protocols to assess the colorfastness of metallic printed fabrics, ensuring that products meet quality standards before they reach the market.

Color Fastness to the Combination of Perspiration and Light of the Reactive Dyeings

An investigation of how the texture surface of a fabric influences its instrumental color

Study on photofading of two natural dyes sodium copper chlorophyllin and gardenia yellow on cotton

Study on Fading Behavior of Reactive Black 5 DyedFabrics in Washing Process

Color Emotion Factors and Preference of Two-Color Combinations with Contrast Tones by Naturally Dyed Fabrics with Persimmon and Indigo

Analyzing the lightfastness of Indigo and woad-dyed cotton using different reducing agents, lemon treatment and variation in dye concentration

Study of the Influence of the Surface Roughness of Knitted Fabrics from Natural Fibres on the Light Fastness of Their Colours

A Study on the UV Transmission Property of Cotton Fabric

Dyeing Method and Performances of Reactive Dye Containing Bis(monofluoro-S-triazine) Groups

Dyeing Performance and Color Evaluation of Cotton Fabrics Dyed with Caesalpinia sappan L. and Galla chinensis Mill. Extract, and the Evaluation of Binary Sequential Dyeing Method

Synthesis and Application of Poly(vinylamine-Co-acrylic Acid) Macromolecule Dyes with High Light Fastness

Non-reactive Modification on Cotton and Its Application in Natural Dyeing

Analysis of Colorfastness in Metallic Prints Using Absorption Spectroscopy

Preparation of structural colors on cotton fabrics with hydrophobicity and high color fastness through chemical bonds between polyphenolic hydroxyl groups and polysiloxanes

Union Color of One Bath Dyeing to Silk/Flax Fabrics with Reactive Dyes

Photochemical Stability of a Cotton Fabric Surface Dyed with a Reactive Triphenodioxazine Dye

Dyeing Performances of Natural Dyes on Modified Cotton Fabrics

The dyeing of supermicrofibre nylon with acid and vat dyes

A SIAN J OURNAL OF C HEMISTRY A SIAN J OURNAL OF C HEMISTRY Study on Tencel Fabric Dyeing with Pomegranate Peel Natural Dyes Asian Chemistry; Vol. 29, No. 10 (2017), 2279-2284

Deep‐coloured Polyester/cotton Blends with Low Concentrations of Polymethylol Dyes by a One‐pass Continuous Dyeing Process

Color Difference in Dyeing of Cotton and Ramie with Direct and Cationic Dyes