Abstract:The fabrication, operation, and characterization of a polymer-based rectilinear ion trap mass analyzer is, discussed. A novel, fast prototyping technique, stereolithography (SLA)-based fabrication, traditionally reserved for end use production parts and to fabricate master molds for rubber products, is applied here as a tool to create precise, arbitrary geometries. Taking full advantage of the SLA methodology, an open corner, polymer-based ion trap has been fabricated and tested. The use of a custom resin, Nanoform 15120 (DSM Somos, New Castle, DE), has resulted in a polymer with high heat deflection temperature and greater structural stability at higher temperatures and lower capacitance. The mass analyzer was mounted in a polymer holder and tested in a custom vacuum system using modified LCQ Duo (Thermo Fisher Corp.) electronics. The resolution, mass/charge range, and MS/ MS capabilities were examined using electrospray ionization as well as atmospheric pressure chemical ionization. In the course of this study, three traps of different sizes were fabricated, beginning with a "full size" device measuring 10 x 8 x 50 mm. The next two traps were scaled down by linear factors of a half and a third. SLA is shown to allow fabrication of light, small rectilinear ion traps, which are less expensive and have the same performance as traditional machined devices of the same size. In addition, smaller traps can be built just as easily, and they show unit mass resolution to mass 300, tandem mass spectrometry capabilities, and low power consumption.

Characterization of electrode surface roughness and its impact on ion trap mass analysis.

Characterizing the spatial potential of a surface electrode ion trap

Controlling the Surface Roughness of Surface-Electrode Ion Trap Based on Micro-Nano Fabrication

Rectilinear ion trap: concepts, calculations, and analytical performance of a new mass analyzer.

Novel Linear Ion Trap Mass Analyzer Composed of Four Planar Electrodes

Electron impact ionization loading of a surface electrode ion trap

Characteristics of electrical field and ion motion in surface-electrode ion traps.

Quadrupole ion traps and trap arrays: geometry, material, scale, performance.

Heating rate and electrode charging measurements in a scalable, microfabricated, surface-electrode ion trap

Novel ion traps using planar resistive electrodes: implications for miniaturized mass analyzers

Investigation of the Effect of an Octopole Electric Field on a Linear Ion Trap and an Asymmetric Semi-Circular Linear Ion Trap Analyzer.

Probing surface electric field noise with a single ion

Analytical Performance of Printed Circuit Board Ion Trap Array Mass Analyzer with Electrospray Ionization

(k,m)-Catalan Numbers and Hook Length Polynomials for Plane Trees

Ion-trap electrode preparation with Ne$^+$ bombardment

Miniaturization And Geometry Optimization Of A Polymer-Based Rectilinear Ion Trap

Performance of a Low Voltage Ion Trap

Mass Analysis Using Collective Interaction of Ions in an Ion Trap

Surface science motivated by heating of trapped ions from the quantum ground state

Ion Trap Mass Analysis at High Pressure: an Experimental Characterization.

Characterization of a Serial Array of Miniature Cylindrical Ion Trap Mass Analyzers