Abstract:Amassive number of lithium ion (Li-ion) batteries are used in electric vehicles and the number is still growing rapidly. Li-ion batteries are sensitive to temperature—they likely degrade in an over-cold or an over-hot environment. Battery thermal management systems (BTMSs) are designed to control the battery temperature within the optimal range between 20 and 55°C. Thermal management is one important part of battery management systems. A good BTMS allows researchers to improve the performance, extend the life, and enhance the safety of a battery. We launch this Research Topic to collect the latest technologies and design methodology on BTMSs. Three papers have been published in this issue. Yang et al. designed a semiconductor refrigeration system for a 48 V Li-ion battery pack which often operates at high discharge/charge rates, as shown in Figure 1A. A thermal model of the BTMS was also developed for this semiconductor-based BTMS. This BTMS is integrated with air cooling, limiting the maximum temperature to less than 40°C, as long as the temperature difference is less than 1.6°C. The semiconductor-based BTMS is effective when the battery temperature and discharge rate are high. Wang et al. applied a flat heat pipe (FHP) to a BTMS, utilizing the extremely high thermal dissipation ability of the FHP to remove the heat from the battery, as well as to improve the temperature homogeneity among battery cells. The BTMS structure is presented in Figure 1B. A thermal network model was also developed for this BTMS and the simulation agreed with the experiment data. The thickness, porosity, and particle diameter of a sintered wick on the thermal performance of the battery was investigated and the FHP was optimized. An FHP allows a radiator to be placed aside the battery pack as a condensation sector, making the battery pack compact. Luo et al. designed a novel direct liquid cooling BTMS. With a unique structure shown in Figure 1C, the BTMS can be used for cylindrical battery cells with water as the thermal fluid, without worrying about the potential risks of the electric conductivities of water. A numerical model was developed and validated with the system. They investigated the effects of the coolant flowrate and suggested a high flowrate (>500 mL/min) is needed for the discharge at a rate above 3C of a 20-cell module. Multiple inlets were also suggested to improve the temperature uniformity. These studies have shown new prototypes of battery cooling with semiconductors, heat pipes, and direct liquid cooling, which could provide alternatives for thermal management in commercial battery modules. Edited and reviewed by: Sheng S. Zhang, United States Army Research Laboratory, United States

Thermal management techniques of lithium-ion battery pack for electric vehicles

An Intelligent Thermal Management System for Optimized Lithium-Ion Battery Pack

Theoretical and Experimental Investigations on Liquid Immersion Cooling Battery Packs for Electric Vehicles Based on Analysis of Battery Heat Generation Characteristics

Heating Strategy for Electric Vehicular Battery Pack Based on CFD Analysis

Research on Thermal Management System for the Vehicle Application of Lithium-Ion Power Batteries

Advances on Two-Phase Heat Transfer for Lithium-Ion Battery Thermal Management

Thermal management for prevention of failures of lithium ion battery packs in electric vehicles: A review and critical future aspects

Hybrid Battery Thermal Management System in Electrical Vehicles: A Review

Thermal Characteristics of Power Battery Pack with Liquid-Based Thermal Management

Research progress on power battery cooling technology for electric vehicles

A critical review of thermal management models and solutions of lithium-ion batteries for the development of pure electric vehicles

Editorial: Advanced Battery Thermal Management Systems

A review on recent progress, challenges and perspective of battery thermal management system

Theory and Practices of Li-Ion Battery Thermal Management for Electric and Hybrid Electric Vehicles

A Review on Thermal Management of Li-ion Battery: from Small-Scale Battery Module to Large-Scale Electrochemical Energy Storage Power Station

Thermal Analysis and Improvements of the Power Battery Pack with Liquid Cooling for Electric Vehicles

Research progress on efficient thermal management system for electric vehicle batteries based on two-phase transformation

Performance simulation of a heat pipe and refrigerant-based lithium-ion battery thermal management system coupled with electric vehicle air-conditioning

A review of air-cooling battery thermal management systems for electric and hybrid electric vehicles

A Review on Battery Thermal Management for New Energy Vehicles